User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Application Deployment
Installing Applications Using the USB Connection
Use the USB connection to install applications onto the device.
1. Connect the device to a host computer using the USB-C cable.
When transferring files or debugging, make sure there is only one USB connection to the device. For
example, if using a USB cable, do not dock the device or attach an expansion back.
2. On the device, pull down the Notification panel and touch Charging this device via USB.
By default, No data transfer is selected.
3. Touch File Transfer.
4. On the host computer, open a file explorer application.
5. On the host computer, copy the application APK file from the host computer to the device.
CAUTION: Carefully follow the host computer’s instructions to unmount the microSD card and
disconnect USB devices correctly to avoid losing information.
6. Disconnect the device from the host computer.
7.
Swipe the screen up and select to view files on theInternal Storage.
8. Locate the application APK file.
9. Touch the application file.
10. Touch Continue to install the app or Cancel to stop the installation.
11. To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
12. Touch Open to open the application or Done to exit the installation process.
The application appears in the App list.
Installing Applications Using a USB Drive
Use a USB drive to install applications on the device.
IMPORTANT: USB Drive must have FAT32 format.
1. Plug the USB drive into the USB port on the host computer.
2. On the host computer, open a file explorer application.
3. Copy the application APK file from the host computer to the USB drive.
CAUTION: Follow the host computer’s instructions to eject the USB drive correctly to avoid
losing information.
4. Eject the USB drive from the host computer.
5. Plug the USB drive into the USB port on the device.
A notification appears indicating that the device detected the USB drive.
6.
Swipe the screen up and select to view files on the USB drive.
7. Touch General USB drive.
8. Locate the application APK file.
140