User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Accessories
Power Pack
Indicators
Description
Solid Green LED
Blinking Green LED
Blinking Red LED
Power not applied to Power Pack.
Charge level is between 0% and 20%.
Charge level is between 20% and 40%.
Change level is between 40% and 60%.
Charge level is between 60% and 80%.
Charge level is between 80% and 100%.
Fully charged.
Charging error.
Table 27Power Pack Charge Status Indicators
Power Pack
The optional Power Pack provides additional power for charging the main battery.
NOTE: If the tablet is equipped with an Expansion Back and Power Pack, it produces recurring
beep alerts when there is no user activity and the internal battery is fully charged by the Power
Pack. To avoid the beeping alerts, the user is advised to remove the Power Pack from the
Expansion Pack once the internal battery reaches 100%.
123