User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Accessories
2. Insert the Power Pack into a slot.
Power Pack Charging Indicators
Charge Power Packs in ambient temperatures from 0°C to +40°C (32°F to 104°F) as reported by the Power
Pack. Charging is intelligently controlled by the charger. To accomplish this, for small periods of time,
the charger alternately enables and disables Power Pack charging to keep the battery at acceptable
temperatures.
The Power Pack charge LED shows the status of the battery charging. The Power Pack charges in less than
three hours. When charging, the Charge LEDs indicate the charge level.
Figure 29Power Pack Charge LEDs
1
1 Charge level indicators
122