User manual
Table Of Contents
- Contents
- About this Guide
- Getting Started
- Using the Device
- Settings
- Applications
- Data Capture
- Imaging
- Scanning Considerations
- Scanning with an Internal Scanner
- Scanning with the Camera
- Scanning with the RS507/RS507X Hands-Free Imager
- Scanning with the RS5100 Ring Scanner
- Scanning with the RS6000 Bluetooth Ring Scanner
- Scanning with the DS2278 Digital Scanner
- Scanning with the DS3678 Bluetooth Scanner
- Scanning with the DS8178 Digital Scanner
- Scanning with the LI3678 Linear Imager
- DataWedge
- Supported Decoders
- Camera Supported Decoders
- SE4100 Internal Imager Supported Decoders
- SE4710 Internal Imager Supported Decoders
- SE4720 Internal Imager Supported Decoders
- RS507/RS507x Supported Decoders
- RS5100 Supported Decoders
- RS6000 Supported Decoders
- DS2278 Supported Decoders
- DS3678 Supported Decoders
- DS8178 Supported Decoders
- LI3678 Supported Decoders
- Wireless
- Accessories
- Application Deployment
- Maintenance and Troubleshooting
- Technical Specifications
Accessories
Power Supply(USB)
PWR-WUA5V12W0BR
Provides 12 VDC, 2.5 A power to the USB cable. Includes plug adapter for use in the Brazil.
DC Line Cord
CBL-DC-381A1-01
Provides power from the power supply (PWR-BGA12V108W0WW) to the 4-Slot Charge Only Cradle.
DC Line Cord
CBL-DC-388A1-01
Provides power from the power supply (PWR-BGA12V50W0WW) to the 1-Slot Charge Only Cradle
and 4-Slot Battery Charger.
US AC Line Cord
23844-00-00R
Provide power to power supplies.
Device Charging
Before using the tablet for the first time, connect it to an external power source. Keep the tablet connected
to the external power source until fully charged. The Charging Indicator LED turns green when the tablet is
fully charged. You may use the tablet while it is charging.
Charging Indicators
Charge the tablet's battery before using the tablet.
The 8 in. tablet battery charges from fully depleted to 80% in approximately 3 hours.
The 10 in. tablet battery charges from fully depleted to 80% in approximately 4 hours.
NOTE: The Charging indicator only illuminates when the device is connected to a power source.
When charging using a USB-C cable with the device powered off, the LED does not illuminate.
LED Indication
Off Device is not in cradle; not seated properly; or cradle is not powered.
Slow blinking orange
(1 blink every 4 seconds)
Device is charging.
Slow blinking red
(1 blink every 4 seconds)
Device is charging but the battery is at end of useful life.
Fast blinking orange
(2 blinks/second)
Charging error. Possible charging errors include:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically eight
hours).
Table 26Charging Indicators
107