Quick Start

ET40/45 Quick Start Guide
12. Rotate the cover down (2).
2
1
13. Carefully press down around the edges of the cover. Make sure that the cover is seated properly.
Device Charging
Before using the tablet for the first time, connect it to an external power source. Keep the tablet connected
to the external power source until fully charged. The Charging Indicator LED turns green when the tablet is
fully charged. You may use the tablet while it is charging.
Charging Accessories
For theoptimumcharging experience, use a Zebra approved charging accessory.
Charging accessories for the ET40/ET45 include:
1-Slot Charge Only Cradle(CRD-ET4X-1SCHRG1-01)
4-Slot Charge Only Cradle(CRD-ET4X-4SCHRG1-01)
USB-CCharging Cable (CBL-TC5X-USBC2A-01)
Charging Indicators
Charge the tablet's battery before using the tablet.
The 8 in. tablet battery charges from fully depleted to 80% in approximately 3 hours.
The 10 in. tablet battery charges from fully depleted to 80% in approximately 4 hours.
NOTE: The Charging indicator only illuminates when the device is connected to a power source.
8