Quick Start

ET40/45 Quick Start Guide
Number Item Description
4 Rear Microphone Use for audio recordings.
5 Rear camera Autofocus camera that takes photos.
6 Rear camera LED
flash
Provides illumination for the camera.
7 Battery cover notch Lift the notched section of the battery cover to remove the battery
cover from the tablet.
8 Top scan button Initiates barcode data capture when a scan-enabled application is
active (programmable).
9 Top Microphone Use for voice communications or audio recordings.
10 Programmable
button
Button that is configurable for use with applications.
11 PTT button Typically used forPush-to-Talkcommunications. Where regulatory
restrictions exist, button is configurable for use with other
applications.
12 Volume up button Increases audio volume.
13 Volume down button Decreases audio volume.
Table 2Device Rear View(Continued)
Setting Up the Device
Set up the device before using it for the first time.
1. Install the nano SIM Card. (ET45 only)
2. Charge the device.
3. Power on the device.
Installing the nano SIM Card
A nano-SIM card slot is available only on ET45 devices.The following steps only apply when installing or
replacing a nano SIM card.
1. Ensure the tablet is powered off.
CAUTION: Do not attempt to remove the battery while the tablet is powered on.
a) Press and hold the Power button until the menu appears.
b) Touch Power off.
5