User's Manual

Regulatory and Industry Approvals
Rev 4 Sep.11 Proprietary and Confidential - Contents subject to change 63
• All antennas in the final product must be at least 20 cm from users and
nearby persons.
OEM product instruction manual content
Consistent with §2.909(a), the following text must be included within the user’s
manual or operator instruction guide for the final commercial product. (OEM-
specific content is displayed in italics.)
Operating Requirements and Conditions
The design of (Product Name) complies with U.S. Federal Communications Commission
(FCC) guidelines respecting safety levels of radio frequency (RF) exposure for (OEM to
insert device classification: Mobile or Portable) devices.
FCC ID: (Include Standalone FCC ID or Module FCC ID as required)
Note: Include the following RF Exposure statement for Mobile devices only.
RF Exposure - This device is only authorized for use in a mobile application. At least
20
cm (8 inches) of separation distance between the (Product Name) device and the user's
body must be maintained at all times.
Note: Include the following RF Exposure statement for Portable devices only.
RF Exposure - This device has been tested for compliance with FCC RF exposure limits
in a portable configuration. At least (Insert Required Separation Distance from RF
Exposure Evaluation)
cm of separation distance between the (Product Name) device and
the user's body must be maintained at all times. This device must not be used with any
other antenna or transmitter that has not been approved to operate in conjunction with this
device.
Note: Always include the following Caution statement.
CAUTION: Any changes or modifications not expressly approved by (Company Name)
or Sierra Wireless could void the user’s authority to operate the equipment.
Note: Include the following statement if Part 15 of the FCC Rules is required. Integration
into host devices containing unlicensed devices may require additional comments in this
section. The OEM should confirm the extent of their user’s guide content with their
preferred regulatory test lab.
Note: This equipment has been tested and found to comply with the limits for a (OEM to
insert device type: Class A or Class B) digital device, pursuant to Part 15 of the FCC
Rules. (OEM must follow Part 15 guidelines (§15.105 and §15.19) to determine
additional statements required in this section for their device class)