User's Manual
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Copyright
- Trademarks
- Contact Information
- Revision History
- 1: Introduction
- 2: Technology Overview
- 3: Standards Compliance
- 4: Electrical Specifications
- 5: RF Specifications
- 6: Power
- 7: Software Interface
- 8: Mechanical and Environmental Specifications
- 9: Regulatory and Industry Approvals
- A: Antenna Specification
- B: Design Checklist
- C: Testing
- D: Packaging
- E: References
- F: Acronyms
- Index
Rev 4 Sep.11 Proprietary and Confidential - Contents subject to change 53
8
8: Mechanical and Environmental Specifi-
cations
The MC7750 module complies with the mechanical and
environmental specifications in
Ta b l e 8-1. Final product conformance
to these specifications depends on the OEM device implementation.
Table 8-1: Mechanical and environmental specifications
Mode Details
Temperature Operational -30ºC to +60ºC – Full RF compliance
Non-operational -40ºC to +85ºC, 96 hours
(from MIL-STD 202 Method 108)
Relative humidity Non-operational 85ºC, 85% relative humidity for 48 hours
(non-condensing)
Vibration Non-operational Random vibration, 10 to 1000 Hz, nominal
6 G rms in each of three mutually perpendicular axes.
Test duration of 60 minutes for each axis, for a total test
time of three hours.
Shock Non-operational Half sine shock, 2 ms, 180 in/s (375 g).
Tested in each of three mutually perpendicular axes,
positive and negative (5 x 6, 30 bumps total).
Drop Non-operational 1 m on concrete on each of six faces, two times (module
only).
(Electrostatic discharge
(
See Electrostatic
discharge (ESD) on
page 55.)
Operational The RF port (antenna launch and RF connector) complies
with the IEC 61000-4-2 standard:
• Electrostatic Discharge Immunity: Test: Level3
Contact Discharge: ±6 kV
Air Discharge: ±8 kV
Non-operational The host connector Interface complies with the following
standards only:
• +/- 1 kV Human Body Model (JESD22-A114-B)
• +/- 125 V Charged Device Model (JESD22-C101)
Thermal considerations See Thermal considerations on page 56.
Form factor PCI-Express Mini Card shielded with metal and metalized
fabric
Dimensions Length: 50.95 mm
Width: 30 mm
Thickness: 4.75 mm
Weight: Approximately 10 g