User's Manual
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Copyright
- Trademarks
- Contact Information
- Revision History
- 1: Introduction
- 2: Technology Overview
- 3: Standards Compliance
- 4: Electrical Specifications
- 5: RF Specifications
- 6: Power
- 7: Software Interface
- 8: Mechanical and Environmental Specifications
- 9: Regulatory and Industry Approvals
- A: Antenna Specification
- B: Design Checklist
- C: Testing
- D: Packaging
- E: References
- F: Acronyms
- Index
Preface
Rev 4 Sep.11 Proprietary and Confidential - Contents subject to change 5
Revision
History
Revision
number
Release date Changes
1 August 2010 Initial release.
2 January 2011 Resolved most TBDs.
Removed references to dial-up networking.
Updated Figure 4-1, System block diagram, on page 24;
Figure 4-2, Expanded RF block diagram, on page 25;
Figure 8-2, Dimensioned view, on page 54.
Updated Table 5-5, Conducted Rx (Receive) sensitivity, on page 43; Table 6-1,
Averaged standby DC power consumption, on page 45;
Table 6-3, Averaged call mode DC power consumption (LTE), on page 46;
Table 6-4, Averaged Call Mode DC power consumption (GSM / EDGE), on page 70.
Added a list of tables and list of figures.
Removed unused glossary entries.
3 May 2011 General review and redraft
4 September 2011 Updated LED table
Removed UMTS/GSM references
Updated LTE power consumption
Added suggested antenna part number