User's Manual

Product Technical Specification & Customer Design Guidelines
46 Proprietary and Confidential - Contents subject to change 2400074
Table 6-2: CDMA DC power consumption (+3.3V)
Description Bands Typ Max Units Notes / configuration
IS-2000 1X Data current PCS 366 - mA SO32, RC3 (Fwd) / RC3 (Rvs),
153.6 kbps (Fwd) / 76.8 kbps
(Rvs),
CDG Urban Profile, USB
active
423 - mA SO32, RC3 (Fwd) / RC3 (Rvs),
153.6 kbps (Fwd) / 76.8 kbps
(Rvs), CDG Suburban Profile, USB
active
Cellular 327 - mA SO32, RC3 (Fwd) / RC3 (Rvs),
153.6 kbps (Fwd) / 76.8 kbps
(Rvs), CDG Urban Profile, USB
active
370 - mA SO32, RC3 (Fwd) / RC3 (Rvs),
153.6 kbps (Fwd) / 76.8 kbps
(Rvs), CDG Suburban Profile, USB
active
IS-856 1xEV-DO
Revision 0 Data current
PCS 404 - mA CDG Urban Profile, USB active
475 - mA CDG Suburban Profile, USB active
Cellular 324 - mA CDG Urban Profile, USB active
377 - mA CDG Suburban Profile, USB active
IS-856A 1xEV-DO
Revision A Data current
PCS 408 - mA CDG Urban Profile, USB active
479 - mA CDG Suburban Profile, USB active
Cellular 331 - mA CDG Urban Profile, USB active
386 - mA CDG Suburban Profile, USB active
Maximum peak current
– operational
PCS or Cellular 1.2 A Max RF output power, full rate, full
operating temperature range.
Maximum peak current
– call connected
1.0 A Max RF output power, full rate, full
operating temperature range
Table 6-3: Averaged call mode DC power consumption (LTE)
1
Signal Description
Band
2
Current
Notes / configuration
Max
3
Unit
VCC Data current consumption
(includes USB bus current)
LTE category 3 LTE bands 550 mA 100 / 50 Mbps — 0 dBm Tx power
1. All measurements are preliminary values
2. For supported bands, see Table 5-1, LTE frequency band support, on page 42 and Table 5-3, CDMA frequency
band support, on page 42.
3. Measured at 30ºC / nominal voltage.