User's Manual

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults
iX104C
3
User’s Handbook 95
Setting digitizer input method security
Follow these steps to specify whether the tablet user can change the
digitizer input method settings:
1. In the BIOS Setup Utility, select the Password tab.
2. In the Password Setting field, select a value from the drop-down
list as follows:
3. Click OK.
4. Reboot the computer.
Value Description Notes
No passwords set Anyone can change the
digitizer input settings.
This setting is not
controlled by Windows
User groups.
Supervisor
password set only
A supervisor password
must be entered in order
to change the input
settings.
The supervisor
password must be
entered before the BIOS
Setup Utility will open.
User password set The user cannot change
the input settings.
Only the supervisor can
change the input
settings.