User's Manual
Table Of Contents
- Contents
- 1 Getting Started 17
- 2 Using the iX104C3 27
- 3 Maintaining the iX104C3 67
- Welcome
- 1 Getting Started
- 2 Using the iX104C3
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the tablet
- Connecting devices
- Using the battery
- Accessing the hard disk drive compartment
- Accessing the PCMCIA compartment
- Programming hot keys
- 3 Maintaining the iX104C3
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- F Configuring Dual Mode Tablet Digitizer Input Methods
- Index
iX104C
3
User’s Handbook 93
F Configuring Dual Mode Tablet Digitizer Input
Methods
This appendix explains how to use the BIOS Setup Utility and the
Panel Control Center to configure the
iX104C
3
Dual Mode tablet
digitizer input settings.
■ Use the BIOS Setup Utility to set the default input method.
■ Use the Panel Control Center to set controls for temporary
changes to input methods for single sessions.
The section “Summary: Dual Mode digitizer input method settings”
on page 98 provides an overview of settings to make in the BIOS
Setup Utility and the Panel Control Center to achieve various input
method configurations.
The section “Sample implementations” on page 103 explains how to
set up two sample configurations.
Using the BIOS Setup Utility to set input method defaults
Starting the BIOS Setup Utility
When the computer is starting up, press the P2 key.
The BIOS Setup Utility window opens.