User's Manual
Table Of Contents
- Contents
- 1 Getting Started 21
- 2 Using the iX104C2 35
- 3 Maintaining the iX104C2 75
- Welcome
- 1 Getting Started
- 2 Using the iX104C2
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the tablet
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104C2
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
Chapter 3. Maintaining the iX104C2
Calibrating the digitizer
82 iX104C
2
User’s Handbook
Calibrating the digitizer: iX104C
2
Dual Mode
In Active mode, you can use only the special pen included with the
computer as the pointing device.
In Touch mode, you can use the pen, a similar pointing device, or
your finger.
Follow the instructions in the sections below to calibrate the digitizer
for each mode.
Calibrating the digitizer: Active mode
1. From the
Start menu, select Control Panel.
The Control Panel opens.
2. Click the
Tablet and Pen Settings icon.
See “Selecting Auto-
Sense, Active, or Touch
mode” on page 43.
Tablet and
Pen Settings
icon