User's Manual

Chapter 3. Maintaining the Tablet
XC6 User’s Handbook 64
Calibrating the digitizer
Calibrating the digitizer adjusts the cursor position on the screen relative
to the position of the pen tip or finger. Calibrate the digitizer to adjust the
distance error between where the pen or finger is actually touching the
screen and where the computer is registering the pen or finger touch.
You may need to calibrate the digitizer in the following situations:
■ You are using the computer for the first time.
■ The previous user of the computer writes with the opposite hand or
at a different pen angle.
■ The computer has not been used for some time.
■ The computer has been serviced.
1. From the Start menu, select Control Panel. The Control Panel opens.