User's Manual

Chapter 2. Using the Tablet
XC6 User’s Handbook 23
Turning off the computer
When the computer is in
Sleep mode, the Status
LED is breathing green.
1. If the computer is in Sleep mode, press the Power On/Off, Backlight
On/Off, Sleep/Resume button to resume operation. (See page 32 for
information about Sleep mode.)
Power O n /Off,
Backlight On/Off and
Sleep/Resume
bu tton
2. Make sure the battery is charged or that the computer is plugged in
to an external power source.
3. Save your work and close all programs.
4. From the Windows Start menu, click Turn Off Computer.
5. The Turn off computer dialog box opens.
6. Click Turn Off or press the Power button continuously for more
than 4 seconds.
Using the Reset switch
Use the Reset switch
only if you cannot turn
off the computer by any
other means, because
you may lose unsaved
data.
If the computer does not seem to be accepting input and you cannot turn it
off by using the method described in “Turning off the computer,” press the
Reset switch. (Use the stylus or a similar instrument to press the switch).
Reset switch