User's Manual

Chapter 1. Getting Started
XC6 User’s Handbook 19
LED indicators
The LED indicator lights show the status of system functions. The Drive LED blinks whenever one of the
SSDs are accessed. Table 1 defines the states of the Status LED.
Status
LED
Drive LED
Table 1 Status LED Indicator State Definitions
LED State
AC Adapter
Battery
Tablet Mode
Green, Blinking slowly
Plugged In
Charging
On, Off, or Hibernating
Fully Charged
Sleep Mode
Green / Cyan, Blinking slowly
Plugged In
Charging
Green, Breathing
Not Plugged In
Discharging
Plugged In
Removed
Green, Continuous
Plugged In
Fully Charged
On
Removed
Not Plugged In
Discharging
Off (No Light)
All Conditions
All Conditions
Off or Hibernating (or any Night Vision Mode).
Blue, Continuous
All Conditions
All Conditions
On. Front or Rear Camera is active.
Red, Blinking Quickly
Not Plugged In
Discharging, <10%
On. Plug the tablet into an AC/DC power source or
install a charged battery.
Red, Continuous
Not Plugged In
Discharging, <3%
On. Plug the tablet into an AC/DC power source or
install a charged battery.
Installed
1. Off. Battery is critically low. Plug the tablet into an
AC/DC power source or install a charged battery.
2. Or, the tablet has encountered a fault and is not
operating normally. Contact your computer support
personnel, such as your help desk.
Amber, Continuous
All Conditions
Installed
High Temperature Threshold Exceeded
Amber / Green, Blinking Quickly
All Conditions
Installed
Critical Temperature Threshold Exceeded