C5/F5-Series EasyConnect RFID Long Range Reader User’s Guide
© 2013 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document may be reproduced in any form without written consent from Motion. The information in this document is provided “as is” and is subject to change without notice. Motion is not liable for errors or omissions in this document. Motion Computing, Inc. has made every effort to identify trademarked properties and owners on this page.
Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools/supplies needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of the C5/F5-Series EasyConnect RFID Long Range Reader . . . . . . . . . . . . . .
Getting Started 1 TheC5/F5-Series EasyConnect RFID Long Range Reader is designed specifically for Motion Computing’s C5/F5-Series Tablet PCs. This solution delivers the mobility and productivity of a handheld RFID Reader device with the flexibility and functionality of a powerful PC. With the 3G connectivity of our C5/F5-series Tablet PCs, the RFID Long Range Reader provides scanning capabilities in even the most remote locations.
Package contents 1. C5/F5-Series EasyConnect RFID Long Range Reader 2. One set of rubber feet for the clip-on installation option 3. One set of plastic feet for the semi-permanent installation option 4. Two M2 x 18 Phillips-head screws for semi-permanent installation of feet Tools/supplies needed You’ll need a Phillips-head screwdriver for attaching the screws if you choose the semipermanent installation option.
Overview of the C5/F5-Series EasyConnect RFID Long Range Reader The C5/F5- Series EasyConnect RFID Long Range Reader’s docking connector and guide posts attach to the bottom of the C5/F5-Series Tablet PC.
Attaching the C5/F5-Series EasyConnect RFID Long Range Reader Before installing the C5/F5-Series EasyConnect RFID Long Range Reader, you’ll need to remove the two feet on the back of the Tablet PC to properly attach the reader. This step is required for either the clip-on or semi-permanent installation option. Remove these feet before you install the feet for the RFID Long Range Reader. Clip-on installation The clip-on installation option enables you to easily attach and remove the RFID Long Range Reader.
4. To remove the RFID Long Range Reader, insert your finger in the slot at the top of the reader, pull back the tab, and slide the reader off the Tablet PC. Semi-permanent installation If you want to install the RFID Long Range Reader so that it stays attached to your Tablet PC for frequent, long-term use, you can opt for semi-permanent installation. For RFID Long Range Reader semi-permanent installation: 1.
Using your RFID Long Range Reader 2 This chapter provides information about installing the Motion RFID Wedge software and using your C5/F5-Series EasyConnect RFID Long Range Reader. Motion RFID Wedge You can use the RFID reader application of your choice with your RFID Long Range Reader or you can use Motion Computing’s Motion RFID Wedge software with your reader. To install Motion RFID Wedge: 1. Download the installation .zip file here: http://www.motioncomputing.
Using Motion RFID Wedge To use the Motion RFID Wedge application: 1. Ensure that your RFID Long Range Reader is attached to your Tablet PC. 2. From the Windows® 8 Start Screen, tap the Motion RFID Wedge tile to open the application. (You may have to swipe to the left if you don’t see the tile initially.) OR 3. From the Windows® desktop, tap the Motion RFID Wedge icon in the taskbar. 4.
The following configuration options are available in Motion RFID Wedge Settings: • Reader(s) Found—Contains a list of the RFID Reader(s) found in your Tablet PC. • Tag Type—RFID tag types you can choose for your scans. You can also opt for autodetection of RFID tags. Note: In most cases, auto-detect will work. Contact your System Administrator if you have issues with this setting.
Reader(s) Found This drop-down list will contain any RFID Reader(s) Motion RFID Wedge finds in your Tablet PC. Typically, the Motion RFID Long Range Reader will be the only reader listed in this menu. If more than one RFID Reader is detected, select the Motion RFID Reader from the list. Tag Type Select Auto Detect from the drop-down list if you want the RFID Long Range Reader to Auto Detect the RFID tag type.
Using the C5/F5-Series EasyConnect RFID Long Range Reader This section contains information about basic operation of the RFID Long Range Reader when using the Motion RFID Wedge software. To scan an RFID tag: 1. Ensure that your RFID Long Range Reader is attached to your Tablet PC. 2. Open an application that accepts text input (some examples of this are Microsoft® Word, Microsoft® Excel, and Windows® Notepad). 3. Open the Motion RFID Wedge application (see Using Motion RFID Wedge on page 7). 4.
Motion RFID Wedge APIs You can customize your C5/F5-Series EasyConnect RFID Long Range Reader for specialized communication with your Tablet PC by utilizing APIs that are available for your reader. Go here: https://skyetek.zendesk.com/forums/21812122-API-s to access the APIs.
Troubleshooting 3 The EasyConnect RFID Long Range Reader for F5-Series and C5-Series Tablet PCs are thoroughly tested for performance and quality, but occasionally issues can still occur. If you don’t find the information you’re looking for in this section, go to Motion Computing Support. NOTE: Enterprise users should contact their support organization for assistance with resolving application or connectivity issues. Use the information in this section to identify and resolve common issues.
