User's Manual
Table Of Contents
- Microsoft Windows XP Tablet PC Edition 2005
- User Guide
- About This User Guide
- Chapter 1 Getting Started with Your Tablet PC
- Using the Motion Digitizer Pen
- Helpful Hints: Pen and Ink
- Complete the Microsoft Tablet PC Tutorials
- Review User Guide
- Open the Motion Dashboard
- Visit the Microsoft Help and Support Center
- Tablet PC Display
- Fingerprint Reader
- Motion AC Adapter
- Motion Battery Pack
- Battery Status LEDs
- Motion Dashboard
- Motion Third-Party Software Solutions
- Chapter 2 Using Your Motion Tablet PC
- Configuring Tablet and Pen Settings
- Calibrating and Using Your Digital Pen
- Using the Tablet PC Input Panel
- Helpful Hints: Using the TIP Window
- Motion Dashboard Audio System Controls
- Adjusting Display Settings and Screen Brightness
- Creating Schemes for External Monitors
- Helpful Hints: Mirrored and Extended Modes
- Configuring Your Power Management Settings
- Using Your Batteries
- Helpful Hints: Battery and Power Management
- Security Features and Settings
- Motion Security Center
- The Fingerprint Reader and Motion OmniPass
- Helpful Hints: Successful Fingerprint Captures
- Capturing a Fingerprint
- Capturing a Second Fingerprint Later
- Configuring Advanced OmniPass Features
- Logging Onto a Remembered Site
- The OmniPass Help application contains information about exporting your user profile. Go to Motion Dashboard then Motion Security Center > Motion OmniPass, and tap Help in the Action panel.
- Configuring Strong Logon Security
- Infineon Trusted Platform Module
- Windows Security System Components Overview
- Introduction to Speech
- Motion Speak Anywhere Technology
- Speech Recognition
- Helpful Hints: Dictating and Recording
- PC Cards
- SD Cards
- Infrared (IrDA) Port
- USB Ports
- Speaker Port (LE1600 only)
- Microphone Port (LE1600 only)
- DVI-D Connector (LE1600 only)
- VGA Connector
- Docking Connector
- Wi-Fi (802.11) Wireless Connections
- Bluetooth Wireless Connections
- Using the Bluetooth Application
- Helpful Hints: Bluetooth Wireless
- Using Infrared Wireless Connections
- Chapter 3 Care and Maintenance
- General Care
- Caring for the Standard and View Anywhere Displays
- Caring for the Motion Digitizer Pen
- Ordering New Pens
- Traveling by Air
- FAA Wireless Air Travel Requirement
- Other Travel Hints
- Appendix A Troubleshooting and Support
- Standard and Extended Warranty and Insurance Programs
- Appendix B Motion Tablet PC Specifications
Motion Computing LE1600 and LS800 Tablet PC User Guide 59
1. Open the Motion Dashboard and make sure the speakers and
microphone are turned on (the default settings).
2. Check that the speaker volume and microphone sound levels on the
Motion Dashboard are appropriate for your setting.
3. Tap the TIP icon on the menu bar at the bottom of the Tablet PC dis-
play. The TIP appears.
4. Tap the down-arrow beside Tools to open the Tools options.
5. Tap Speech. The first time you access this function, a Speech Rec-
ognition Enrollment message appears. You must adjust the micro-
phone and train speech recognition before continuing. Until you
complete speech training, the speech button is inactive. This takes
about 10 minutes.
6. Tap Next and follow the Microphone Wizard.
NOTE: To improve speech recognition, run additional speech
training sessions.
Using Speech Recognition: Setting Up Dictation or Voice Commands.
Once you activate speech recognition, depending on your work setting
(single-person office or small or large meeting) and what you plan to do
(dictate, use voice commands), you may want to change the Motion
Dashboard microphone angle from Medium (the default) to either Narrow
or Wide. You may then also want to calibrate the direction of the
microphones.
1. Open the Motion Dashboard and select the desired angle.
2. (Optional) To use either Medium or Narrow Angle to dictate from a
direction other than directly in front of the display, tap Calibrate and
read through the calibration script.
NOTE: Calibration will skew the angle at which the
microphones detect your voice while keeping the same
relative angle of acceptance.
3. To start the Speech recognizer, open the TIP window.
4. Select Dictation (to convert spoken words into typed text) or
Commands (to use your voice to enter commands, such as “Enter,”
“Save,” “Open”).
NOTE: For more information about using this feature and for
available voice commands, see the Windows Help and
Support Center where you can search for topics about speech
recognition and training. Also available are the speech
tutorials. To find the speech tutorials, select Start > Help; then
Support > Welcome to Tablet PC > Tablet PC Tutorials.
Helpful Hints: Dictating and Recording
• You may want to start recording or dictating from the Wide Angle
(Motion Dashboard setting) and change to a more-restricted angle
(Narrow or Medium) if too many outside sounds are recorded. The