User's Manual

40 Motion Computing LE1600 and LS800 Tablet PC User Guide
battery. Hibernate saves the status of the Tablet PC to
your hard drive.
4. Tap Hibernate or Stand By. The Tablet PC opens a dialog box
stating that it is “preparing to standby or hibernate.”
5. Wait until the system shuts down. In Hibernate, all LEDs are off; in
Stand By, the Power LED flashes.
6. Slide the battery release latches on the back of the Tablet PC toward
the center and lift the battery upward to remove it.
7. Insert the new battery until you hear the left latch click, which
ensures the new battery is correctly seated. Slide the right latch fur-
ther to the right to lock it in place. Check to make sure the latches
are fully seated.
CAUTION: To avoid damage to the Tablet PC, install
only Motion Computing batteries, which are specially
designed for the Tablet PC.
Disposing of Used Batteries. The Tablet PC contains a Lithium-ion (Li-ion)
battery that should be disposed of at a hazardous materials recycling center
when it is no longer serviceable. Do not throw it in a waste receptacle where
it will be sent to a landfill.
Helpful Hints: Battery and Power Management
• Use AC power when available to lengthen the battery’s usable life. The
battery will charge automatically as you run on AC power, so leave the
battery in the Tablet PC while you are working.
• Use AC power when installing software or writing to a CD, and for opti-
mal battery life, when using a CD or DVD player.
• When using battery power, if you leave the Tablet PC unattended, place
the system in Stand By or Hibernate.
• Keep in mind that the display, processor, PC Cards, SD cards, wireless
cards, and accessory drives all draw on the battery, so adjust properties
and disable unused accessories and PC Cards when operating on bat-
tery power.
• When using battery power, adjust the power mode and display bright-
ness to lower settings to prolong the battery life.
• Turn off all wireless devices through the Motion Dashboard when not
being used.
• Enable the Ambient Light Sensor (ALS) through Motion Dashboard.
See the section “Adjusting Display Settings and Screen Brightness” on
page 30.
Security Features and Settings
Motion Computing has strongly embraced the need for enhanced platform-
based security for the Tablet PC. The result of that commitment has been to
provide an out-of-box, safe computing environment that enables strong
security protection and that will serve as the foundation for complementary
add-on security technologies. These core security features include