User's Manual
Table Of Contents
- Safety and Regulatory Guide
- Product Safety Information
- Basic Personal Safety Precautions
- Set Up Precautions
- Tablet PC Precautions
- High Risk and Dangerous Activity Warning
- Cabling and Power Cord Precautions
- Power Adapter Precautions
- Battery Pack Warnings and Precautions
- Battery Charger Precautions
- Battery Pack Disposal
- Travel Precautions
- Internal Modem Precautions
- Component Replacement Precautions
- Wireless Mini-PCI Devices
- Accessory Precautions
- Motion-Recommended Third-Party Accessories
- Comfort and Health
- Regulatory and Safety Compliance
5. Holding the wireless mini-PCI card at a 25-degree
angle, gently push it into the mini-PCI socket of the
Tablet PC motherboard until it is firmly seated.
6. Snap the card into place.
7. Connect the gray antenna from the Tablet PC to the
RF MAIN terminal of the mini-PCI card.
8. Connect the black antenna on the Tablet PC to the
RF AUX auxiliary terminal of the mini-PCI card.
9. Replace the cover on the bottom of the Tablet PC,
reinsert the screws, and tighten them.
10. Reinsert the battery and connect to AC power; then
power up the Tablet PC.
RF Main RF Aux
23