User's Guide
Table Of Contents
- Microsoft Windows XP Tablet PC Edition 2005
- User Guide
- How To Search The PDF Documentation
- Copyright Information
- About This User Guide
- Chapter 1 Getting Started with Your Tablet PC
- Using the Motion Digitizer Pen
- Helpful Hints: Pen and Ink
- Complete the Microsoft Tablet PC Tutorials
- Open the Motion Dashboard
- Visit the Microsoft Help and Support Center
- Tablet PC Display
- Fingerprint Reader
- Motion AC Adapter
- Motion Battery Pack
- Battery Status LEDs
- Motion Dashboard
- Motion Third-Party Software Solutions
- Chapter 2 Using Your Motion Tablet PC
- Configuring Tablet and Pen Settings
- Calibrating and Using Your Digital Pen
- Using the Tablet PC Input Panel
- Helpful Hints: Using the TIP Window
- Motion Dashboard Audio System Controls
- Adjusting Display Settings and Screen Brightness
- Creating Schemes for External Monitors
- Helpful Hints: Mirrored and Extended Modes
- Configuring Your Power Management Settings
- Using Your Batteries
- Helpful Hints: Battery and Power Management
- Security Features and Settings
- Motion Security Center
- The Fingerprint Reader and Motion OmniPass
- Helpful Hints: Successful Fingerprint Captures
- Capturing a Fingerprint
- Capturing a Second Fingerprint Later
- Configuring Advanced Motion OmniPass Features
- Logging Onto a Remembered Site
- The Motion OmniPass Help application con tains information about exporting your user profile. Go to Motion Dash board then Security Center panel > Motion OmniPass, and tap Help in the Action panel.
- Configuring Strong Logon Security
- Infineon Trusted Platform Module
- Windows Security System Components Overview
- Introduction to Speech
- Motion Speak Anywhere Technology
- Speech Recognition
- Helpful Hints: Dictating and Recording
- PC Cards (LE1600)
- SD Cards
- Infrared (IrDA) Port
- USB Ports
- Speaker Port (LE1600)
- Microphone Port (LE1600)
- DVI-D Connector (LE1600)
- VGA Connector
- Docking Connector
- Wi-Fi (802.11) Wireless Connections
- Bluetooth Wireless Connections
- Using the Bluetooth Application
- Helpful Hints: Bluetooth Wireless
- Using Infrared Wireless Connections
- Chapter 3 Care and Maintenance
- General Care
- Caring for the Display
- Caring for the Motion Digitizer Pen
- Ordering New Pens
- Traveling by Air
- Helpful Hints: Traveling with your Tablet PC
- Appendix A Troubleshooting and Support
- Standard and Extended Warranty and Insurance Programs
- Appendix B Motion Tablet PC Specifications
82 Motion Computing LE1600 and LS800 Tablet PC User Guide
The pen button doesn’t work. I
can’t get it to right-click.
The right-click option for the
pen button may be
deactivated.
Re-activate the right-click
option: Double-click the Tablet
and Pen Settings icon, select
Pen Options, and reselect Use
pen button to right-click. Select
Apply > OK.
You may not be correctly timing
clicking the pen button and
tapping the pen on the display.
To right-click, hold the pen
button down and then firmly tap
on the display.
The buttons on the Tablet PC
don’t do what I expect them to
do.
Button functions have been
changed.
Double-tap the Tablet and Pen
Settings icon, then Tablet
Buttons. You can reset the
buttons to the defaults. NOTE:
Button functions are
associated with the orientation
in which they’re programmed.
INTERFACE/PORTS
The system doesn’t recognize
the PC card I’ve inserted
(LE1600 only).
The card is incorrectly inserted. Eject the card and re-insert it
with the label side up.
The device is not supported. Check Windows XP
compatibility.
The system doesn’t recognize
a USB device.
Windows XP may take a short
time to recognize the device.
Wait until Windows XP
recognizes the device.
The accessory isn’t connected
to the Tablet PC correctly.
Check the connection cable
and be sure it is inserted into
the correct port on the Tablet
PC and the accessory device.
The correct driver isn’t built into
Windows XP.
Use the device’s installation
CD or check the
manufacturer’s website for the
correct driver.
The Tablet PC is sitting in the
Motion FlexDock for the LE
Series, or the Motion
MobileDock for the LS Series
but the system doesn’t
recognize any accessory
devices, such as the external
monitor or DVD/CD RW.
The Tablet PC isn’t fully
seated.
Reseat the Tablet PC in the
Motion FlexDock for the LE
Series, or the Motion
MobileDock for the LS Series.
AUDIO
No sound is coming from the
built-in speakers.
Connecting a headset or
external speakers mutes the
built-in speakers.
Disconnect the headset or
external speakers if not in use.