User's Guide

Motion Computing LE1600 and LS800 Tablet PC User Guide 75
1. Grasp the old tip with the silver ring of the tip replacement tool. Use
the notch on the ring to grab the tip.
2. Pull the old tip out of the pen.
3. Insert a new tip.
4. Apply slight pressure to push it into place.
Ordering New Pens
To order additional pens, visit the Motion Computing website at
www.motioncomputing.com/accessories.
TRAVELING
WITH YOUR
TABLET PC
Here are some tips for traveling with your Tablet PC:
• Remove all accessories and cables. Remember to pack those you will
need while traveling and do not forget to pack at least one Motion
digitizer pen.
• Slip the Tablet PC into a portfolio to protect the display.
• Protect the pen by keeping it in the Tablet PC pen bay or portfolio case
during travel.
• Pack the Tablet PC securely in a briefcase or hand-carried luggage, and
keep it separate from toiletries, liquids, and food. Do not pack it in
checked luggage when you travel.
• Keep the Tablet PC stable during travel; secure it to prevent it from slid-
ing around in overhead bins and car trunks.
NOTE: For travel warnings, refer to “FAA Wireless Air Travel
Requirement” on page 75.
Traveling by Air
• Prepare for airport security by charging the battery in the event Security
asks you to start the Tablet PC.
• Have it hand-inspected or sent through the X-ray scanner, but never
carry it through the metal detector.
• Either turn off or place the Tablet PC in hibernation mode for takeoff
and landing.
FAA Wireless Air Travel Requirement. WARNING: The FAA
requires that you suspend wireless operations, such
as 802.11 and Bluetooth, before boarding the plane.
The easiest way to disable internal wireless
operations is by pressing the Wireless on/off button
for 1/2 second. You can also uncheck (disable) all
wireless devices in the Motion Dashboard. The
wireless LED on the Tablet PC front panel, shown
here, is off when wireless communications are
disabled. To disable external wireless operations, remove any
installed wireless PC Cards.