User's Guide

Motion Computing LE1600 and LS800 Tablet PC User Guide 59
in the area of the SD Card. This makes it easier to grip the edge of
the card for insertion and removal.
Infrared (IrDA) Port
The IrDA port uses the infrared connection protocol to transfer data or digital
images from any IrDA enabled device to a specified file location on another
IrDA equipped device. Typically, the devices must be within three feet of
each other. Refer to the “Using Infrared Wireless Connections” on page 68
for more information.
USB Ports
There are two high speed USB ports on the Tablet PC that can be used to
attach any USB device to the Tablet PC. Typically a USB device draws
power from the Tablet PC, therefore it is advisable to use AC power
whenever USB devices are attached. Running USB devices while operating
on battery power will adversely affect your rate of power consumption.
Speaker Port (LE1600)
The speaker port is on the left edge of the LE1600 Tablet PC. It is marked
with a small headphones symbol and is designed as an audio output
channel only. You can attach external speakers or headphones to this port.
When headphones or external speakers are attached, the internal speakers
are disabled.
Microphone Port (LE1600)
The microphone port is on the left edge of the LE1600 Tablet PC. It is
marked with a small microphone symbol and is designed as an audio input/
line in channel only. You can attach an external microphone directly to this
port to enhance your audio recording capabilities. When an external
microphone is attached, the built-in microphones are disabled.
Audio In/Audio Out Port (LS800)
There is a single Audio In/Audio Out port on the LS800 Tablet PC. That
port be used for either an audio in connection (such as line in or a
microphone) or an audio out connection (such as headphones or external
speakers).
DVI-D Connector (LE1600)
The DVI-D (Digital Video Interface) Connector is on the left edge of the
Tablet PC and is identified by the DVI-D designation. This connector is
provided for the direct attachment of a digital video monitor. An optional
DVI-D cable is available from Motion Computing for this purpose. When an
external monitor is attached, the Motion Dashboard Display panel settings
can be used to set the external display as a mirrored or extended display.
VGA Connector
The VGA Connector is on the left edge of the Tablet PC. It is intended for
use with standard analog video displays. An attachment cable is not
provided for this purpose; if you use the Tablet PC with a standard VGA-type