User's Guide

Motion Computing LE1600 and LS800 Tablet PC User Guide 43
• User settings
• System settings
• You can modify the Motion OmniPass startup options
• You can enable Strong Logon Security to authenticate with a specific
security device before showing the windows desktop
• Vault management
• The vault is a storage area for passwords and dialogs that you have
associated with web sites and applications.
• Encrypting and decrypting files
• You can encrypt any file on your Tablet PC except for system files.
• Only an authenticated user can decrypt files that have been
encrypted.
Descriptions of these features may be found in the Motion OmniPass Help
section (open Motion Dashboard then Security Center panel> Motion
OmniPass and tap the Help icon in that window).
Helpful Hints: Successful Fingerprint Captures
• Be consistent. Hold your finger and scan at the same angle each time.
For example, if you enroll your finger with your hand open (or closed),
hold your hand this way each time you scan. If you enroll your thumb
while holding the edge of the Tablet PC while scanning, you need to
scan like this each time.
• The scanner is bi-directional; you can move your finger from right-to-left
or left-to-right.
• Read the prompts carefully and make sure you are waiting to be
prompted before each swipe.
• Swiping too fast or too slow can make a capture unsuccessful. Change
the swipe speed until you learn what speed works best.
• When scanning, press hard enough to fully contact both the nickel-col-
ored ring and the sensor; you do not have to press hard.
• Rub your fingers together to stimulate the natural skin oils so your fin-
gerprint is easier for the sensor to detect. Conversely, wipe your finger
off so nothing interferes with the scan.
• If you are repeatedly having trouble getting a good scan, you may need
to clean the sensor. First, power down the Tablet PC and remove the
battery. Then, clean the sensor using a cotton swab sprayed with a
window-type cleaner (no bleach, solvents, or abrasives); then dry the
sensor. Do not spray, pour, or otherwise dispense any liquid directly on
the sensor.
• If you are having trouble enrolling a specific finger, enroll a different fin-
ger. Typically, you will get the best results by scanning an index finger,
thumb, middle finger, ring finger, and little finger in that order.
Capturing a Fingerprint
1. Tap Motion Dashboard then Security Center panel > Motion
OmniPass > Manage OmniPass Users and Settings > Add a new
user to OmniPass. This step enrolls a new user; you decide on the
authentication method (e.g., fingerprint, digital certificate, TPM, etc.).