User's Guide
Table Of Contents
- Microsoft Windows XP Tablet PC Edition 2005
- User Guide
- How To Search The PDF Documentation
- Copyright Information
- About This User Guide
- Chapter 1 Getting Started with Your Tablet PC
- Using the Motion Digitizer Pen
- Helpful Hints: Pen and Ink
- Complete the Microsoft Tablet PC Tutorials
- Open the Motion Dashboard
- Visit the Microsoft Help and Support Center
- Tablet PC Display
- Fingerprint Reader
- Motion AC Adapter
- Motion Battery Pack
- Battery Status LEDs
- Motion Dashboard
- Motion Third-Party Software Solutions
- Chapter 2 Using Your Motion Tablet PC
- Configuring Tablet and Pen Settings
- Calibrating and Using Your Digital Pen
- Using the Tablet PC Input Panel
- Helpful Hints: Using the TIP Window
- Motion Dashboard Audio System Controls
- Adjusting Display Settings and Screen Brightness
- Creating Schemes for External Monitors
- Helpful Hints: Mirrored and Extended Modes
- Configuring Your Power Management Settings
- Using Your Batteries
- Helpful Hints: Battery and Power Management
- Security Features and Settings
- Motion Security Center
- The Fingerprint Reader and Motion OmniPass
- Helpful Hints: Successful Fingerprint Captures
- Capturing a Fingerprint
- Capturing a Second Fingerprint Later
- Configuring Advanced Motion OmniPass Features
- Logging Onto a Remembered Site
- The Motion OmniPass Help application con tains information about exporting your user profile. Go to Motion Dash board then Security Center panel > Motion OmniPass, and tap Help in the Action panel.
- Configuring Strong Logon Security
- Infineon Trusted Platform Module
- Windows Security System Components Overview
- Introduction to Speech
- Motion Speak Anywhere Technology
- Speech Recognition
- Helpful Hints: Dictating and Recording
- PC Cards (LE1600)
- SD Cards
- Infrared (IrDA) Port
- USB Ports
- Speaker Port (LE1600)
- Microphone Port (LE1600)
- DVI-D Connector (LE1600)
- VGA Connector
- Docking Connector
- Wi-Fi (802.11) Wireless Connections
- Bluetooth Wireless Connections
- Using the Bluetooth Application
- Helpful Hints: Bluetooth Wireless
- Using Infrared Wireless Connections
- Chapter 3 Care and Maintenance
- General Care
- Caring for the Display
- Caring for the Motion Digitizer Pen
- Ordering New Pens
- Traveling by Air
- Helpful Hints: Traveling with your Tablet PC
- Appendix A Troubleshooting and Support
- Standard and Extended Warranty and Insurance Programs
- Appendix B Motion Tablet PC Specifications
Motion Computing LE1600 and LS800 Tablet PC User Guide 37
running on the battery). To see remaining power, tap Power Meter; or
tap Adjust Power Properties > Power Meter tab.
From the Windows Control Panel (in Classic view), double-click Power
Options. Or (in Category View), tap Performance and Maintenance,
then tap Power Options.
Using Your Batteries
This section describes how to use your Tablet PC battery. The Standard
Battery is located at the top of the Tablet PC. There is an optional Extended
Battery that can be attached to the back of the Motion LE1600 Tablet PC.
The upper center area of the back of the LE1600 Tablet PC includes a small
sliding panel that covers the terminal connections for the Extended Battery.
Caution: Ensure that the sliding panel is open before attempting to
attach the Extended Battery. Otherwise, there may be damage to the
Extended Battery connector.
Both the Standard and the Extended Battery (LE1600 only) will recharge by
using the AC adapter when attached to the Tablet PC.
Charging the Battery. When you connect the Tablet PC to AC power with a
battery attached, the system automatically charges the battery until it
reaches full charge. If two batteries are attached, the primary battery
charges first, followed by the secondary battery. The charging sequence is
staggered to ensure that both batteries become fully charged at nearly the
same time. The standard battery charges to the 80% level, followed by the
Extended Battery charging to the 80% level. Then each battery charges for
a short interval until both reach 100%.
The Battery Status LED is on the Tablet PC flashes amber when the battery
is at a critically low level and changes to solid amber while charging. When
the battery is fully charged, the Battery Status LED is solid blue.
WARNING: To avoid injury, keep the battery within
the recommended temperature range when
charging it. Wait until it cools to room temperature
before recharging it in the Tablet PC or the battery
charger. For more information, see the Safety and
Regulatory Guide shipped with your Tablet PC or the
documentation that came with the battery charger.
Or go to www.motioncomputing.com/support to view
these documents.
To charge the battery:
1. Plug the AC adapter into the Tablet PC, then into a wall outlet or
power strip. (Completely recharging the battery may take up to two
hours, although the battery reaches an 80% charge in much
less time.)
Swapping the Battery. You can swap the Standard Battery while the
system is powered on, with or without having the Tablet PC plugged into an
AC power outlet.