User's Manual

English 43
• AS/NZS 3548 Class B (EN55022/CISPR22) – Limits and Methods of
Measurement of Radio Interference characteristics of Information
Technology Equipment
• ANSI C63.4 – Methods of Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment in the range of 9KHz–
40GHz
• AS/NZS 4251.2 (EN55024/CISPR24) – Limits and Methods of
Measurement of Immunity characteristics of Information Technology
Equipment
Other notices and marks
Tablet PC Model CFT-003 and Docking Station model TCD001
Medical grade AC adapter notices
• Please check with your facility coordinator or regulatory staff to
determine whether your environment requires compliance to IEC/EN
60601-1 / IEC/EN 60601-1-2; UL 60601-1 / UL 60601-1-2; or C22.2 No. 601-
1 / C22.2 No. 601-1-2. If your environment requires compliance to these
standards, please contact Motion Computing for information about how
to purchase your Medical Grade AC Adapter and Medical Grade AC
Adapter power cord.
• Use only the Medical Grade AC Adapter and power cord that are
approved for the C5v Tablet PC. Use of any other type of medical grade
adapter may be a risk for fire or explosion and can void your warranty.
• When you use the Medical Grade AC Adapter to run the C5v Tablet PC or
to charge the C5v Tablet PC’s battery, place the Medical Grade AC
Adapter in a ventilated area such as on a desk or floor. Do not cover the
adapter with objects, which can reduce cooling. Do not use the Medical
Grade AC Adapter while it is inside a carrying case.
• Do not place objects on the power cord. Place the power cord in a
location where it cannot be tripped over or stepped on.
• Disconnect power cords and cables by grasping the connector; do not
pull on the power cord itself. As you pull out the connector, keep it evenly
aligned to avoid bending any connector pins. Before you connect a
power cord, make sure both connectors are correctly aligned.