User's Manual

English 25
Important: To disable internal Tablet PC wireless operations, open the Motion
Dashboard (navigate to Start>All Programs>Motion Computing>Motion
Dashboard), tap Wireless, then disable any wireless connections (802.11
(WLAN), internal Bluetooth wireless radios, WWAN, or RFID).
Modifications
The FCC requires that you be notified that any changes or modifications
made to this device that are not expressly approved by Motion Computing,
Inc. may void your authority to operate the equipment.
Cables
Connections to this Tablet PC must be made only with shielded cables. This
reduces possible interference with radio communications and complies with
FCC Rules and Regulations for this EMC classification.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment also complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2),
which addresses RF exposure from radio frequency devices. Operation is
within 5.15GHz–5.25GHz frequency range. This frequency range may limit or
restrict the effective use of this equipment to an indoor environment. This
radiated output power is far below the FCC RF exposure limits. Nevertheless,
this device should be used in such a manner that the potential for human
contact during normal operation is minimized. This equipment contains an
internal antenna transmitter whose effective use may be affected if it is co-
located or operating in conjunction with any other antenna or transmitter.
Airline travel notice
The FAA requires that you suspend wireless operations before boarding an
airplane. These include both internal and external wireless devices. See
Important below.
Important: To disable internal Tablet PC wireless operations, open the Motion
Dashboard (navigate to Start>All Programs>Motion Computing>Motion
Dashboard), tap Wireless, then disable any wireless connections (802.11 or
internal Bluetooth wireless radios).