User's Manual

English 9
Specifications
Product safety information
Motion Tablet PCs and accessories are designed to optimize safety,
minimize strain, and withstand the rigors of portability. However, to
further reduce the risk of personal injury or damage to the unit, certain
precautions should be observed.
Product mounting and installation disclaimer
Motion Computing shall not be liable under any theory of liability
(including, without limitation, contract, tort or statutory law) for any loss,
damage, personal injury, or other damage of any nature (including,
without limitation, direct, special, incidental or consequential damages)
arising directly or indirectly as a result of improper or inappropriate
placement, installation, or use of its products or any other application. In
order to safely install and use Motion products, full consideration of
occupants, systems (e.g., the location of fuel lines, navigation systems,
brakes lines, electrical, drive train or other systems), air-bags and other
back-up, warning or safety equipment is required. Without limiting the
foregoing, Motion specifically disclaims any responsibility for the
placement, use, or installation of its products not consistent with (i) the
original manufacturer’s or governmental or regulatory specifications and
recommendations for the environment where the products will be
placed, used or installed, (ii) Motion written product instruction sheets,
or (iii) workmanship standards.
Temperature On Off (Storage/
Transportation)
Temperature 5–40°C -20–60°C
Humidity 20–80% RH 10–90% RH
Air pressure 697–1060 hPa 187–1060 hPa
Power supply (ITE)
Delta Electronics, ADP-
50HH Rev. B
Input: 1.5 A, 100–240 VAC, 50–60 Hz. Output 19 V DC,
2.64 A. Power supply adapter is compliant with
UL 60950-1, CAN/CSA C22.2 No. 60950-1,
IEC/EN 60950-1
Power supply
Sinpro M/N: MPU50-107
(for C5 [CFT-001] only)
Input: 1.35 A, 100–240 VAC, 47–63 Hz. Output 19 V DC,
2.63 A. Power supply adapter is compliant with UL
60601-1, CAN/CSA C22.2 No. 601-1, IEC/EN 60601-1