User's Manual

32 English
Federal Communications Commission notice (USA)
Electromagnetic Interference (EMI) is any
electromagnetic disturbance that interrupts, obstructs, or
otherwise degrades or limits the effective performance of
electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with
authorized electronic emissions, which may include
television, AM/FM broadcasts, cellular services, radar, air-
traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF)
emission limits to provide an interference-free RF spectrum. Many
electronic devices, including computers, generate RF energy incidental
to their intended function and are, therefore, covered by these rules.
Your Motion Tablet PC, Docking station, and all accessories meet the
regulatory agency limits for Electromagnetic Compatibility (EMC). EMC is
the ability of electronic devices, including computers, to function
properly together in the electronic environment. However, there is no
guarantee that in a specific installation it will not cause interference.
Should this equipment cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more
of the following measures:
• Reorient the receiving antenna.
• Relocate the Tablet PC and the receiver.
• Separate the Tablet PC and the receiver.
• Plug the Tablet PC and receiver into different circuits.
You may also need to contact a radio/television technician for assistance.
Unintentional emitter per FCC Part 15
The rating label on Motion Tablet PCs, Docking stations and all
accessories show which class (A or B) these devices fall into. Class B
devices have an FCC logo (shown here) or FCC ID on the label. Class A
devices do not have an FCC ID on the label. Once you determine the
class of the device, refer to the following corresponding statement and
to the FCC notices in this Safety and Regulatory Guide.
• Class A is for business or industrial environments.
• Class B is for residential environments.