User's Manual

16 Chapter 2 Features
RFID reader
Your system includes an integrated 13.56 MHz RFID (Radio Frequency Identification) reader
that you can use to retrieve information from RFID tags.
RFID tags use radio frequency (RF) transmissions to identify a product, animal, or person.
RFID does not require direct contact or line-of-sight scanning, and can be scanned through
many materials, including clothing. An RFID tag can store much more data than a typical
bar code, and some RFID tags can both transmit and record data. RFID can be used for asset
tracking, identification, process control, health care, and pharmaceutical applications.
The RFID reader supports the following formats:
• ISO/IEC 14443A/B
• ISO/IEC 15693
• ISO/IEC 18000-3
For information about using the RFID reader, see “Using the RFID reader” on page 28.
The system also includes an integrated 13.56MHz high-frequency passive RFID tag that can
be used for identification and short-range asset tracking. The tag is located on the back of
the tablet, below the battery, and under the FCC label.
Microphones
The system is equipped with two liquid-resistant microphones that you can use to record
audio, dictate notes, and use voice commands without the need for an external
microphone.
For information about using the microphones, see “Using the built-in microphones” on
page 30.
Speaker
The system includes a sealed speaker that can be used for audio warnings or confirmation,
dictation, videos, or other multimedia applications.
Docking connector
The docking connector is used to attach the unit to a docking station. When the unit is
docked, you can use the ports on the docking station to connect a monitor, keyboard,
mouse, or other external USB devices.
For more information about the Docking Station and other accessories, go to the Motion
Computing accessories page at www.motioncomputing.com/accessories.