USER MANUAL (EN)
CONTENT English SAFETY INFORMATION Electrical Safety, Antenna, Pixelfault ....................................................4 Power Supply, Case of Service ............................................................5 Application, USB / MicroSD, Insert Batteries........................................6 Recycling Information ........................................................................7 EU- Declaration of Conformity ..........................................................
SAFETY INFORMATION English The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INFORMATION Power Supply The device can only be operated with the voltage described on the back. If you do not know the voltage, please ask an electrician. To avoid overload, do not operate too many other devices at the same outlet. Be sure to install power cables so that no one can trip over them. The cable is sheathed and insulates the electricity. Please do not place any objects on the cable, as this may result in loss of the protective function.
SAFETY INFORMATION English Application Reception of digital programs via antenna (DVB-T / T2). Play supported video, picture and music files. Connection of compatible mass storage devices. USB Port / MicroSD The TV may take some time to fully read and run the storage device. Do not remove the storage device until all recordings or playbacks have finished.
RECYCLING INFORMATION English Recycling of Electronic Devices This product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/ recycling centre.
FIRST STEPS Ports & Keys English Front view Back view 1 2 Display Status LED 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 MENU ▲/▼ ENTER / SOURCE DC IN TF CARD AV IN OFF/ON USB TV 8 Blinking Red device is charging Red LED on device is fully charged Green LED on device is in operating mode Opens main menu Toggles a channel up / down, navigates up / down OK /Confirm Decrease / increase volume, navigate left / right Button to switch the signal source Remote sensor Speaker Stand Connection for the power sup
FIRST STEPS Remote Control FAV INFO Red Key / Green Key Yellow Key Blue Taste / MIX / TV/RADIO / REVEAL/ INDEX TEXT / HOLD / To standby / switch on the device Starts an instant recording Mute Choose source Number keys Increase / decrease the volume Opens Mediaplayer/recordings Subtitle menu Open electronic program overview Audiomenu Opens main menu Back Confirm Navigation up/down, channel next/previous Navigation left/right, Volume control Opens favorites Opens channel information Red function key, t
FIRST STEPS English Installation Make sure that the device is switched off and disconnected from the mains during installation. Only when all connections have been made, switch on the device via the mains switch. Power Supply Use only the supplied AC adapter to power and charge the TV. Observe the information on the rating plate of the power supply unit. Notes: The power supply provides a stabilized DC voltage. Operating with an unstabilized voltage can damage the device.
FIRST STEPS Basic Functions The basic functions of the remote control are described below: Number Buttons You can directly select the desired station by entering the program slot using the number buttons 0-9. Volume / Mute Press the MUTE button on the remote control to turn off the sound. A crossed-out speaker symbol appears. Pressing the key again activates the sound. To adjust the volume, use the + / - or the / buttons on the remote control.
INITIAL INSTALLATION English Initial Installation When you start the device for the first time and/or restore the factory settings (Page 16), the device offers a first-time installation. Make sure your device is connected to an antenna during initial installation and has sufficient reception. In the first window, use the navigation buttons on the remote control to select the desired language of the menu interface and confirm your setting with the OK button.
DAILY OPERATION Favorites List Press the FAV button while watching TV, the favorite list is displayed. With the navigation buttons ▲ / ▼, you can select a station within the favorites list and call it up with the OK button. You can edit the favorites list with the program editor (Page 17). EPG (Electronic Program Guide) Press the EPG key to display the electronic program guide (EPG). You can display the view in two variants with the INDEX button.
DAILY OPERATION The device offers a recording function on connected USB 2.0 data media or on a MicroSD memory card (32 GB max.). Please read the notes on page 6 of this manual! English Finished recordings can be played in the media player of the respective recording medium (page 19). Instant Recording While watching TV, press the REC button and recording will start. Stop recording by pressing the button.
DAILY OPERATION Main Menu Press the MENU button to call up the main menu of the device. Here you can configure the device according to your wishes. Use the navigation buttons ▲ ▼ to select and the OK button to confirm entries. With the EXIT key you can leave the main menu at any time. VOLUME You can make the following settings: Audio mode You can use the buttons choose between predefined settings. Select the "User" option for all the setting options below set.
DAILY OPERATION Sleeptimer English Save energy Timezone Here you can set a time slot in define minutes if the device is to be put into standby mode automatically, if none entries made. According to EU directives, electrical devices must automatically switch to standby mode after 3 hours, if no ent ries have been made in the meantime respectively. This should save energy. In this menu you can deactivate this function.
DAILY OPERATION Sources Lock system Set password Protection of minors SENDER You can make the following settings: Automatic Search Manual Search Program Editor Signal Information 5V Activ Antenna Starts an automatic station search (page 12) Starts a manual transmitter retuning. This is useful if you have only individual frequencies to scan. Starts the channel list editor of the device.
DAILY USE English LCN Software Update If you use the logical channel to use sor ting by your provider, enable this feature. Should you have problems with the sorter sorting and change your station list independently or the channel numbers are not continuous displayed, check if the LCN function is activated! Make sure that this function has been deactivated before the search, if you want to sort your station list manually! Starts the software update via a connected USB data carrier.
MULTIMEDIA PLAYER The device offers you a multimedia player. Connect a USB 2.0 mass storage or MicroSD memory card to your digital media to the USB input of the device. Press the SOURCE button on the remote control and select the signal source USB or MicroSD, depending on the medium you have connected to the device. Note: Recordings that you have created with the device are in the "_MSTPVR" folder. This is automatically created by the device during a recording. All available media will now be previewed.
TROUBLE SHOOTING English Please read the following information to find out the possible cause of a problem before contacting our customer service. Problem Device does not turn on No sound. Solution Check whether the power adapter is properly connected to the power outlet. Check if the cable of the power supply is properly connected to the device. Check whether the built-in battery of the device is charged and / or charge the device before use.
WARRANTY MAS Elektronik AG is not liable for any accessories not belonging to original package content such as DVDs, hard disc drives, Flash storage devices, batteries, etc. This limited warranty covers the warranty requirements set by authorities in your country. This limited warranty does not cover finishes, accessories or batteries, nor does it cover damage resulting from accident, misuse, abuse, dirt, water, battery leakage, tampering, servicing performed or attempted by unauthorized service agencies.
