Operation Manual

12 MegaPAD
English
Android Operation Mode
Settings / WIRELESS & NETWORKS / Wi-Fi
• Tap the menu item " Wi-Fi " on the slider to "ON " appears. Now, the unit automatically
searches for available WLAN networks in the area.
• Tap on the name of the network to which you want to connect your device . If the network
requires a password , now opens a window for entering a password.
• Enter the password and tap the wireless network on "Connect" . The password is stored in
the device and the network automatically establishes the connection when it is in range .
By clicking the icon at the right top of the screen, you can configure advanced connection
settings.
Android System Settings
Settings / WIRELESS & NETWORKS / Bluetooth
To set up the Bluetooth connection , proceed as follows:
• Tap the menu item " Bluetooth " on the slider to
"ON" . Now, the unit automatically searches for all
available Bluetooth devices in the area .
• Tap the name of the device with which you want to
connect.
• In the next window you a key for the connection is
displayed. Now click on " Pair "
• On the device with which you want to connect , a
message should appear to confirm the connection.
You may need to enter the previously generated key
for this connection !
• Other settings for the connection you can make by
clicking on the icon behind the name of the
connected device . You can also use the connection
manually disable ( unpair ) .
• By clicking the icon at the right top of the screen ,
advanced connection settings can be made .
To change the visibility of the device you can click the
icon on top.