Operation Manual

27
English
When all settings for the manual station search configured press the blue button to search for chan-
nels automatically according to your settings to start. The following search options are available:
Scan Mode
Standard Searches for stations on transponders which stored in the device
Blind Search Performs a scan transponder in front of the station search, in this case the
machine will scan from any frequency by TV broadcasters. This process
takes a little longer, but also channels on transponders are found which are
not yet known to the unit.
Network Performs a transponder search without channel search
Channel Type
If you want to search for all (also encrypted) channels, or only free to air (FTA) channels are in-
cluded in the search.
Service Type
Do you want to search for radio and TV stations (All), or only for radio (Radio) or TV stations (DTV).
Press the OK button to start the channel search, or EXIT to cancel the channel search.
Note:
As to the TV providers sometimes change station positions or new stations are switched, it is
recommended from time to perform a channel scan of all available TV stations received.
In the window that opens the channel scan. channels found are listed as follows:
TV Analog TV channels
DTV Digital TV channels
Radio Digital radio stations
Data channels with data information eg. OTA updates
In the lower part you will see the progress of the station search. To exit the scan is complete, press
the MENU button.
PICTURE
Picture Mode Choose between preconfigured image settings (Dynamic, Standard, Mild)
or configure your own settings according to your wishes (Personal) for
contrast, brightness, color and hue.
Color Temp Select preconfigured modes for color temperature (Warm, Cool, Normal)
Main menu