Operation Manual

13
English
First Time Installation
Once you have the connection to the antenna or cable, press the power button on the remote control
or on the TV.
The television takes some time for the starting operation. The color of the LED on the front will chan-
ge from red to green. After a short time, the "First Time Installation" appears on the screen:
Language
Press the / buttons on the remote to select the desired
OSD language. Use the ▲ / ▼ keys to move to the next /
previous menu item.
Country
Press the / buttons on the remote to select the desired
country setting. Use the ▲ / ▼ keys to move to the next /
previous menu item.
This takes you to automatic station search (Tuning Setting):
Tune Type
Choose between analog (ATV) or digital (DTV) tune type.
Digital Type
Select which tuner (satellite, cable or DVB-T / 2) to be used
for the channel search.
DVB-S2 channel search (Satellite)
The following settings are possible for the automatic station
search:
Satellite
Select the satellite on which your satellite dish is aimed.
Scan Mode
Default Searches for stations on transponsers which
stored in the device
Blind Search Performs a transponder search before
channel search. the device scans any
frequency by TV broadcasters. This process
takes longer, but also stations are found on
transponders that the device are not known.
Service Type Performs a transponder search without
channel search.