Operation Manual

ManualsBrandsXomax ManualsMultimediaXM-2DTSBN6214

INSTALLATION/OWNER’S MANUAL

DVD Navigation system with 6.2” Touch Screen Display

XM-2DTSBN6214

-4-

-5-

-6- -7-

-8-

Theunit can play the following discs only

Note: The unit is compatible with DVD, DVD+/-R, VCD 1.0/2.0/3.0, SVCD, CD, CD-R, CD-RW and JPEG

CLASS 1 LASER PRODUCT

Laser product symbol: located on the rear panel of the unit, indicate this player is a class laser product, only

use weak laser and on hazardous radiation outside of the unit.

● Read through this instruction manual before installation and use.

● Do not touch the power plug with wet hand.

● Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet

when you do not intend to use the unit for a prolonged period of time). Before moving the unit, remove the

disc from the unit/tray first.

● Do not open the cover or touch any of the components exposed out of the unit, only for qualified

technicians.

● Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damaging the unit.

● Do not place the unit in moist and humid conditions.

● Place the unit on a flat surface and ventilative condition, place ensure the ventilation holes are not covered

to avoid overheating and malfunction.

● Clear the panel and case with soft dry cloth only, do not use any kind of thinner, alcohol or sprays.

● The apparatus shall not exposed to dripping or splashing and that no objects filled with liquids, such as

vases shall be placed on the apparatus.

1. SD CARD SLOT

2. MENU

3. GPS NAVIGATION

4. BAND SWITCHING

5. LONG PRESS:POWER ON/ OFF;

VOLUME UP & DOWN;SELECT KEY

6. AUX IN JACK

Precautions

Replace the Battery

When the operational range of the remote control becomes short or non-functional, replace battery with a

new CR2025 battery. Check the battery polarity before replacement.

Replace The Battery of IR Handset

Notes on installationContents

-3-

Control Panel Layout Remote Control Layout Wiring Diagram General Function

-9-

-10-

-12-

One is the CD DISC

Host after power on standby disc into the disc can be automatically switched on and into the state of play,

such as machine with disc; click the DVD icon in the main interface to play after boot state,

the disc playback classification

POWER ON/OFF

After making sure that the player is properly connected with original wires,

turn the key to ACC ON position, “POW/MUTE” button or “POWR” button

or “SRC” button become RED, press the power button to turn on the player.

MUTE

Press this key to make the audio silence, press again to resume the sound.

Automatically search and preset stations

When preset stations are more than one page,click to select next page stations or

click to select last page stations.Long press , it will search stations from low frequency

FM MODE

to higher frequency, stop at the station searched and start to play that station.

Long press , it will search stations from high frequency to lower frequency,

Install The Unit (DIN front mount)

DIN FRONT-MOUNT (method A)

DIN REAR MOUNT(method B)

Install and Remove the Front Panel

-2-

Note on installation -------------------------------------------------------- 3

Precautions ------------------------------------------------------------------ 4

Control Panel Layout ------------------------------------------------------ 5

Remote Control Layout --------------------------------------------------- 6

Wiring Diagram ------------------------------------------------------------- 7

Ganeral Function ---------------------------------------------------------- 8

Disc Playback Instruction ----------------------------------------------- 10

USB&SD --------------------------------------------------------------- 12

BLUETOOTH OPERATION ----------------------------------- 14

The unit detial -------------------------------------------------------------- 18

The unit is designed for 12V DC, negative ground operation systems only. Before installing the unit, make

sure your vehicle is connected to 12V DC negative grounded electrical system.

The negative battery terminal must be disconnected before making connections which can prevent damage

to the unit from short circuiting.

Be sure to connect the correct speaker to the correct terminal. Never connect the left and right channel

speaker cables to each other or to the vehicle body. Do not block vents or radiator panels. Doing so will

cause heat to build up and may result in fire.

After completion of installation and replacement of battery, press the reset button on the front panel with a

pointed object (such as a ball point pen) to set the unit to its initial status.

Installing the Unit

1. Dashboard

2. Holder

After inserting the holder into the dasrwhboard, select

the appropriate tab according to the thickness of the

dashboard material and bend them inwards to secure

the holder in place.

3. Screw

1. Dashboard

2. Nut (5mm)

3. Plan washer

4. Screw (5*25mm)

5. Screw

6. Starp be sure to use the starp to secure the back of

the unit in place.The starp can be bent by hand to the

desired angle.

7. Plain Washer

Remove the Unit

1. Frame

2. Insert fingers into the groove in the front of frame and

pull out to remove the frame. (When reattaching the

frame,point the side with a groove downwards and

attach it).

3. Lever

Insert the levers supplied with the unit into the grooves

at both sides of the unit as shown in figure until they

click. Pulling the levers makes it possible to remove the

unit from the dashboard.

Installation using the screw holes on the sides of the

Unit.

Fastening the unit to the factory radio mounting

bracket.

1. Select a position where the screw holes of the bracket

and the screw holes of the main unit become aligned

(are fitted) and tighten the screw at 2 places on each

side.Use either truss screws (5*5 mm) or flush surface

screw (4*5 mm).

2. Screw(“T”Position).

3. Dashboard or Console.

Note: The mounting box,outer trim ring,and half-sleeve

are not used for method B installation.

Pull out the battery holder while pressing the stopper 1.

Place battery whth (+) mark facing up into the battery

holder.

Insert the battery holder into the remote controller.

Remove the front panel

Press “REL” button in the panel , pull out the A, then

slightly pull out B

Please see picture on the left

Install the front panel

Put notch B (shown as picture) onto buckle B, and then

slightly press A into the left side.

Note: Please don’t insert finger in control panel. If

connector is dirty, use a clean soft cloth to wipe it clean.

1. Power ON/OFF

2. Disc OUT/IN

3. Switch Modes

4. LCD Panel IN/OUT

5. Screen angle adjustment

6. In disc mode,select next chapter;

In radio mode,seek higer frequencies.

7. Screen angle adjustment

8. Enter main menu

9. Decrease volume

10. Play/Pause

11. Increase volume

12. MUTE

13. In radio mode,select bands;

In other modes,stop playback

14. In disc mode,select next chapter;

In radio mode,seek higer frequencies.

15. UP Keys

16. Enter EQ setup menu

17. Exit menu

18. Left keys

19. Enter keys

20. Right keys

21. Enter image setup menu.Set Brightness

Contrast/Color with up/Down key;

Increase/decrease with left/right arrow key

22. In Bluetooth mode,it is answer/dial/redial

button;In DVD mode,use it to enlarge image.

23. Down keys

24. In Bluetooth mode,hang up the calling;

In DVD mode,it is button to enter disc main menu.

25. Select current band,section or preset

stations; Input phone numbers,etc.

26. In VCD mode,enter PBC menu

27. Enter system setup menu

28. Search and play

29. In Bluetooth mode,input *;

In other modes,switch sound tracks.

30. In Bluetooth mode,input #

In other modes,switch sound tracks

31. Repeat key

1. Press HOME to enter Main Interface

2. Time & Date display bar

3. Click to enter EQ mode

4. Click to enter Bluetooth mode

5. Background change

6. Click to enter TV mode

7. Click to enter SD mode

8. Click to enter navigation

9. Click to enter USB mode

10.Click to enter Radio mode

11.Click to enter iPod mode

12.Click to enter SWC moder

13.Click to enter AUX IN mode

14.Click to enter Calendar mode

15.Click to enter Camera mode

16.Click to enter settings interface

17.Click to enter CLOCK mode

18.Click to enter Video Set mode

19.Click to enter Audio Set mode

20.Click to enter Calculator mode

②

③

①

④

⑤

⑥

⑦

⑧

⑨

⑩

Enter playlist, there are four playback types as following

A B

XM-2DTSBN6214 XM-2DTSBN6214 XM-2DTSBN6214 XM-2DTSBN6214

XM-2DTSBN6214

-11-

XM-2DTSBN6214

-14-

XM-2DTSBN6214

-15-

XM-2DTSBN6214

-13-

XM-2DTSBN6214

-16-

XM-2DTSBN6214

XM-2DTSBN6214 XM-2DTSBN6214 XM-2DTSBN6214

DIAL

7. GPS CARD SLOT

8. OPEN THE DISPLAY PANEL

9. AMS

10. DVD

11.

12. USB SLOT

ESC

OSD

EJECTPOW OPEN

1 2 3

4 5 6

7 8 9

REPEAT

MUTE

SEL

SRC

VOL-

VOL+

BAND

ENTER

PBC

SETUP

AUDIO

ANGLE

ZOOM

ROOT

① ② ③ ④

⑥

⑤

⑦

⑧

⑨

⑩

25 26

29 31

①

②

③

④

⑥

⑤

⑨

⑩

⑦

⑧

21.Click to enter 5 Stones mode

22.Click to enter Puzzle mode

23.Click to enter GPS path mode

Radio Operation Instruction

stop at the station searched and start to play that station.

Click to switch between LOC and DX. In DX state it displays and removes weak signal

stations when scanning and searching stations; in LOC state it displays DX and removes weak signal

stations when scanning and searching stations; Click to switch between Stereo and Mono.

Stereo displays ,Click to switch to AM mode, and / icons become grey because

AM mode doesn’t support these two functions, the other operation is same with FM operation.

Disc Playback Instruction

①

②

③ ④

⑥

⑤

⑦

1. Stop function

2. Selects track function

3. Play function

4. Selects track function

5. Random playback function

6. Looping function

7. Enter the track list and audio, video,

images category selection function

Two is the VCD DISC

Three is the DVD DISC

①

③

④ ⑥⑤

⑦

②

⑨

⑧

1. Channel selection function

2. VCD playback menu

3. Playback progress display and fast

fixed-point play

4. Next page function

5. Last page function

6. DVD play menu option

7. DVD video Angle Choose function

8. Video and photo enlarged with reduced function

9. Voice display icon

USB & SD Card Operation Instruction

Audio playback interface

Video playback interface

Picture playback interface

USB & SD Card Operation Instruction

Disc, USB & SD card playback operation is the same, and when the disc playback operation of some

function were the same the difference is as follows:

Click to swivel

Click to select subtitle

On the left column, from top to bottom it is folder playback, video playback, picture playback and

audio playback.Folder playback is comprehensive playback, includes video, audio, picture.

The default playback mode is audio playback.The right side icons are page up/page down buttons.

Between these two icons there are playlist page numbers and current page number display.

In center of the page there is program list. The program could be selected through right side

up/down buttons and confirmed by click on the program name in the center program list,

the player will play the selected program. If there is no operation on this page, it will restore to

playback interface in 30 seconds.

BLUETOOTH OPERATION

Use the mobile phone to search BT device, when found “ CAR_KIT” , connect and input PIN code.

After successful connection, the mobile phone model will be displayed on this interface.When it is set to

automatic connection, every time the player is turned on, it will automatically connect with mobile phone,

no need to search and connect manually. When it is set to automatic answer,it will automatically answer

the incoming calls (the default setting is non-automatic answer).It is possible to revise BT device name

and PIN code in accordance with customers’ need.Because there are many mobile phone brands in the

market, the system could not match all the phones. To use the BT device normally, it is suggested

to pair the mobile phone with the BT device. When you meet some phone models could not pair

successfully, please contact with the after-sale service center.

After connected successfully,click to enter BT main page. All the buttons are operational status,

input phone numbers and click to dial out.

④

⑤

①

③

②

1. Delete input number/signs

2. Dial out/Answer incoming calling

3. Hang up the phone

4. Successful BT dial display, when dial is

5. BT volume adjustment

successful, the icon displays a phone status.

SETTING INSTRUCTION

PHONE BOOK

Click “Synchronous”, the contacts from phone will be displayed on the player simultaneously.

Click to page up/down the phonebook. Click to make a speed dial.

A2DP

When play BT music, the connected mobile phone must have music with supported audio

format. In the process of playback, click to stop; click to play last track;

click to play next track; click to pause/play.

to select General

to select Factory Set

to select Sound.

XM-2DTSBN6214 XM-2DTSBN6214

NAVIGATION SETUP

Click on system setting interface. Select the map position and confirm it,return to

the main menu page to click Navigation or press NAVI on panel to enter navigation mode.

S.W.C

The player provides the user with eight steering wheel buttons’ function which match with

most car models on the market and the operation is simple.

Firstly, make sure the steering wheel control wires from this player (usually includes two

wires, one is KEY1, the other one is KEY2) are well connected with steering wheel

buttons’ A/D wire; secondly, one hand presses a button on steering wheel, the other hand

click correspondent button on the above interface; if the setup is successful, it shows

“setup successful” and the touch button color becomes grey, the other buttons could be

setup by this way and click to complete SWC setup ; if the setup is unsuccessful or

only some of the steering wheel buttons setup successful, the user must click and

select low resistance, then repeat the setup steps from beginning again.

-18-

-19-

-17-

XM-2DTSBN6214

-20-

-21-

Radio Operation Instruction ------------------------------------------- 9

SETTING INSTRUCTION/GPS ----------------------------------- 17

S.W.C ----------------------------------- 18

XM-2DTSBN6214