Operation Manual

XM-2DTSBN6210

Correct lanes are shown in green, others red with crosses.

If you stray from your route Navigator will automatically

recalculate your journey.

Tapping on the map screen reveals four hidden buttons - zoom in, menu, zoom

out and in the bottom right of the map the route overview button.

Tap the route overview button to see the whole length of you journey. You can

now operate the map without it centring on your GPS position. This is useful if you

want to find other place on the map or find an alternative route.

To get back to navigation mode tap the route overview button again.

Points of interest are divided into six groups.

Tap the blue directional sign to shrink it to a couple of lines. To

expand it, tap it again.

To see the full itinerary of your route tap the manoeuvre arrow on the left of the

screen. To see the itinerary you can go from Menu - Route - Itinerary.

Here you can see driving instructions for

the whole journey.

Tap to select any entry in the itinerary.

Tap the right arrow to show the following

Here you can select to show the select

link on the map, add it to favourites

engine. Once a link is disabled it will not

be used in future route calculations.

Tap on any navigation panel on the right

of the screen to change what it displays.

A screen with several option will appear.

Tap one to select it.

Here you can set what type of information

you want to see in the navigation panel

at the right of the screen as you drive.

Possibilities are:

DST - Distance to destination - how far away you are in km or miles

TTA - Time to destination - the approximate time left before you reach your