Operation Manual

Steering wheel setting
XM-2DTSBN6210
26
Connect the steering wheel control cable, and click the corresponding key to
activate the function.
After entering into the steering wheel control interface, click “Mode ”, then
push the steering wheel “mode” button in your car, it will come out a numerical value,
then it is ok for the mode. Click , then push the steering wheel “volume-”
button in you car, it will come out a numerical value, then it is ok for VOL-,…Click
other buttons accordingly, until all the numerical value come out.
Then the steering wheel function can be used.
Set Navigation
This device is with built-in SD memory card slot. The software or multimedia files
can be stored in SD card and displayed in the device.
1.Insert the SD memory card into the slot properly and push the card in. When
hearing a click, it indicates that the card is inserted.
2.When removing the SD memory card, please push the card, then it will automatically
pop up.
3.The device should be in OFF status when inserting/removing the SD card.
4.When the SD card is played, please do not remove it to avoid data error or lost.
Navigation setting
Setting the navigation software path, click icon, then select the navigation
process(usually a file with EXE extention) according to access path of navigation
Note: If this device is containing a map, and the path is been set. If it is loosing a path,
please set again. If the SD card is removed and inserted, it should be set the path again.
software.