Operation Manual

OPERATION
XM-2DTSBN6210
25
A.Touch CN: to calibration the touch panel
Enter the following pictures, and press the icon:
B.Reset: Reset the device into factory setting.
System setting
A.Key sound, turn on/off the key sound
B.Brake detect, turn of/off the brake signal input.
C.Back car sound
On: In the back car mode, the sound will not stop
Off: In the back car mode, the sound will stop.
D.GPS monitor
On: When the GPS monitor is on, you can hear the sound of DVD/USB/SD/
RADIO while use the GPS navigation.
Off: In this mode, just can hear the navigation sound.
E.3G Internet (not included)
F.Subwoofer