XM-2DTSBN6210 General Operation AM/FM Tuner Operation 11 Multimedia player 13 Disc: DVD/VCD Operation 13 CD/MP3/MP4/WMA/ Multimedia Operation 15 Pictures Operation 16 AUX in 16 Rear view lens/ Calculator/ Game 17 Bluetooth Operation 18 Setting Menu 22 GPS Navigation 27 Troubleshooting 52 Systematic Parameter 53 Signs of Video and Audio 55 About CDs 56
XM-2DTSBN6210 General Operation Profile of main interface 1.Media: SD/USB/DVD 2.Radio 3.GPS navigation 4.Bluetooth 5.AUX in 6.Setting 7.Bluetooth Music 8.IPOD(not included in this device) 9.Calculator 10.Game 11.Connection status: SD. DVD, Bluetooth 12.Shortcut key: DVD, Radio, Navigation, Setting 13.Volume Note: If there is no any device connection, icons for DVD, USB, SD, IPOD and camera will be showed no device. Click is invalid in this case.
XM-2DTSBN6210 Time ·Slide the figures in the set time interface Select the desired time zone Language ·Language-Select desired language(English, Spanish, Deutsch, Russian, Portuguese, French, Chinese, etc. Camera input ·Connect the camera with this device, can be auto detected brake signal when reversing.
XM-2DTSBN6210 AM/FM Tuner Operation Radio interface RDS turn on function Touch Radio icon in main interface or press mode key in panel/SRC key in remote controller to switch to radio mode. 1.Home page: touch the icon to access the main menu 2.Power Saving Mode Shut the screen display to saving power 3.Current Source Indicator Display source currently playing 4.Clock Indicator Show current time 5.Volume display 6.
XM-2DTSBN6210 10.Band Touch this icon to switch radio band, from FM1, FM2, FM3, AM1, AM2 Under every band, 6 stations can be stored. Touch BAND key in radio interface key in the remote control to switch bands among FM and AM. 11.Automatically Searching station Touch this icon to scan radio station automatically. The most recent stations are Press the AMS key in the remote control. the system will automatically search radio stored. station within full channels.
XM-2DTSBN6210 Multimedia player Click Media icon to enter media player: DVD, USB, SD Click the desired media to player, and press the SRC key in the remote control to switch the playing mode. Disc: DVD/VCD Operation Note: Please use the standard and genuine discs and keep discs clean. Proper usage can assure normal service life of this system (this device only supports 12CM disc). Insert disc into disc inlet slightly, the disc will be suctioned into the device automatically.
XM-2DTSBN6210 1.Click the key to enter primary menu of the disc 2.Click to select previous section(item) 3.Play/pause 4.Stop key: stop to play, click play key to start the playing. 5.Click to select next section(item) 6.Play mode (for each click, it will switch among repeat one, repeat all, repeat off and random) 7.Title menu touch to access DVD title menu. 8.Page key(click the key to enter next function menu). 9.Fast reverse touch the speed from 2x to 4x , back to play. 10.
XM-2DTSBN6210 OPERATION Click number in keyboard, click key for confirmation. After confirmation, the system will automatically turn to designated position of the disc for play. CD/MP3/MP4/WMA Multimedia Operation CD/MP3/MP4/WMA Multimedia Operation Insert the disc/USB/SD into disc inlet slightly. The system will automatically play CD/MP3/WMAdisc and the screen will display play interface shown .
XM-2DTSBN6210 8.Play/pause key 9.Stop key 10.Click to select next track 11.Play mode (for each click, it will switch among repeat one, repeat all, repeat off and random) 12.Back to the playing list or folder list Pictures Operation Play JPEG file 1.Previous picture 2.Next picture 3.Play/pause: automatically play 4.Zoom in:+25%,+50%,+75% 5.Zoom out:+25%,+50%,+75% 6.Rotate picture (Click the key continuous, the picture will be rotated in 90 degrees,180 degrees,270 degrees and 0 degree in turn) 7.
XM-2DTSBN6210 OPERATION Rear view Lens Auto operation: After connect with reverse camera, it will auto-detected the reverse signal and show the reverse pictures. The system will swift to any mode to rear view lens mode automatically. When reverse is over, the system will come back to previous mode.
XM-2DTSBN6210 Bluetooth Operation 1.Pairing D A E B C A.Pair key (click the key to connect or disconnect the paired Bluetooth of this device with the mobile device). Enter the default pass word: 0000 if necessary. B.Disconnect pairing C.Search Bluetooth device D.Bluetooth connected states display. E.Display Bluetooth devices list searched Paring method: Click the key to search the Bluetooth device. Click the desired device name, then click to paring. Touch the key to cancel the pairing.
XM-2DTSBN6210 OPERATION A.Dial the phone number B.Press to download the phone book from the mobile at the first time. The second time this icon will become the searching key for searching the name in the phonebook. 3.Call log Dial call: Dial the desired phone number in the list. Missed Calls: Press Missed Calls to retrieve the list of missed calls from the mobile device. Touch the desired number to call. Press the page up/down buttons to navigate through the pages.
XM-2DTSBN6210 G E A F D C B A.Dial/Receive a call B.Sound switch key (click the key to switch the voice between vehicle speaker and mobile device) C.End key D.Keyboard E.Delete F.Redial key G.Click to return menu list 5. Making a call A. Enter the phone number by the number key in the Bluetooth interface. Click the key to clear error input one by one.. Enter the phone number, click key to make a call, click to end a call. B.
XM-2DTSBN6210 OPERATION A. Auto pickup: Set the type of answer phone call: Manual or Automatically. (1)The device will answer a call automatically if the Auto pickup feature is turned on. (2) Manual answer mode The device will answer manually, click the key to answer a call, and click key to end a call. B. Default password: 0000. Click the to reset the paring password, then click to save the new password, and show the new password. Please enter the new password to pair the device. 7.
Settings Default Bluetooth On Options Function Bluetooth is standby when the device is turned on Device Not Paired Device When XM-2DTSBN6210 Name connected, the current Bluetooth device name will be displayed. Press the device name to display a list of available devices that can be connected. Connect Auto After connect with the same device one time, it will be auto connected next time.
XM-2DTSBN6210 OPERATION Set Frequency Area Backlight setting: Background Setting Select the picture you want, then click ok. Car logo setting Select the logo you want, then click ok. Enter password: 0000, select the logo you want, then click ok.
XM-2DTSBN6210 Backlight setting: Click the language you want, then back to main interface to save this setting. Please note that some languages will not show in the system. Sound Setting Select the desired style, then back to the main interface. Click the arrow to enter the speaker setting. you can adjust the speaker volume.
XM-2DTSBN6210 OPERATION A.Touch CN: to calibration the touch panel Enter the following pictures, and press the icon: B.Reset: Reset the device into factory setting. System setting A.Key sound, turn on/off the key sound B.Brake detect, turn of/off the brake signal input. C.Back car sound On: In the back car mode, the sound will not stop Off: In the back car mode, the sound will stop. D.GPS monitor On: When the GPS monitor is on, you can hear the sound of DVD/USB/SD/ RADIO while use the GPS navigation.
XM-2DTSBN6210 Steering wheel setting Connect the steering wheel control cable, and click the corresponding key to activate the function. After entering into the steering wheel control interface, click “Mode ”, then push the steering wheel “mode” button in your car, it will come out a numerical value, then it is ok for the mode.
XM-2DTSBN6210 OPERATION GPS Navigation Using Navigator To start Navigator on the device, tap Start then Programs. Now tap on the Navigator icon. Please note that operating your device while driving can be dangerous and we recommend that you prepare your journey in advance. Now you will be presented with an overview map of the region you have installed. Before you start navigating you must first set up your GPS.
XM-2DTSBN6210 Connecting your GPS receiver Navigator will now configure the GPS for you automatically. If auto-detection has been successful detected, click on the detected GPS. Now this device will be search at COM7,9600 baud. Now you should see a GPS information window. If all is well you will see information about signal and position data coming from the receiver.
XM-2DTSBN6210 OPERATION Please note that this device is without TMC. Setting your destination You can set a destination in several ways, from the map, from the search menu or from one of your favourites From the Map. Tap the position on the map where you want to set your destination. The following menu will appear. Select the destination icon From the Search menu. Select Find & Navigate from the Main Menu or Tap the search icon in map view.
XM-2DTSBN6210 Address If you know the street (and optionally the house number) tap Address. To see a history of previous searches click First select the country.You will now be prompted for the town or region name or postcode. You can type using the on-screen keyboard. As you type Navigator will automatically search for nearest matches and list them underneath. Once you see your town in the list tap it. You must now type the street you are going to (or select TOWN CENTRE).
XM-2DTSBN6210 OPERATION You will now be asked to select a house number from the ranges shown in the list. If you do not know the house number tap ANY. This will allow you to select a destination on the crossroad with another street. A list of all intersecting street will be shown.You will now be shown the following screen. Now tap Navigate and your journey will be calculated.
XM-2DTSBN6210 POI If you want to go to a point of interest tap the POI tab. To see a history of previous searches click First select the country you want to search in. Next select the town, region or postcode area. If you want to search the entire country select ANY. Now you can select the POI type. Points of interest are divided into six groups. Now select the type of POI you are looking for. If you want to search through all points of interest tap ANY. Now type the name of the POI you are looking for.
XM-2DTSBN6210 OPERATION This page operation details, please look at page 31 Nearest This is a location based search useful for finding closest points of interest to: Current Map Position - nearest to the centre of the current map view Current GPS Position - nearest you current position At Destination - nearest to your navigation destination Along Route - nearest points of interest along your route Select one of the options. Now you can select the POI type. Points of interest are divided into six groups.
XM-2DTSBN6210 indicates that the POI is along your route. indicates that the POI does not lie on your route. Select one or more POI's by using the checkboxes on the left. You will now be shown the following screen This page operation details, please look at page 31 Favourites Using favourites you can quickly access locations and set as navigation destinations. Tap on a favourite and you will be taken to the following screen. To expand a group tap on it.
XM-2DTSBN6210 OPERATION This page operation details, please look at page 31 Navigating You should now be in navigation mode. Your journey will be highlighted on the map. You will see something like OR depending on whether you selected 2D or 3D mode. Instructions about your next maneuver are displayed in the opaque bar at the bottom of the screen.
XM-2DTSBN6210 Correct lanes are shown in green, others red with crosses. If you stray from your route Navigator will automatically recalculate your journey. Tapping on the map screen reveals four hidden buttons - zoom in, menu, zoom out and in the bottom right of the map the route overview button. Tap the route overview button to see the whole length of you journey. You can now operate the map without it centring on your GPS position.
XM-2DTSBN6210 OPERATION destination ETA - Time in destination - the approximate time you will arrive at your destination TTM - Time to maneuver - the approximate time before your next maneuve ALT - Altitude, SPD - Speed, AZI - Course, SAT - Number of satellites, GPS - Position, TIM - Time and DAT - Date give you data about your current position and the Satellite signal.
XM-2DTSBN6210 - set as start point - set as waypoint. If you click on an existing waypoint the icon will show as . Select thisicon if you want to delete it. - set as navigation destination - information about the map layers under the circled point - block a road from routing (it will not be used by the routing engine during navigation). A block road is highlighted on the map in purple. To unblock it follow the same procedure but click the icon.
XM-2DTSBN6210 OPERATION Favourites Use favorites to create your own database of favorite locations which you can quickly access and set as navigation destinations. You can add a favorite in two ways, from the map or from the Find & Navigate menu. Favourites can be organised into different groups to make them easier to browse. Before you start adding lots of favourites it would be sensible to add some groups. From the Main menu 2 tap on Favourites Editor. Tap Add Group.
XM-2DTSBN6210 Adding Favourites Adding a favourite from the map If you want to add a favourite from the map make sure you first move and zoom to the right place. Tap on the point where you want to add the favourite. Select the button from the toolbox that appears. Now enter the name of the favourite. Type a name for the favourite. If you want to add it to an existing group tap Select Group. A list of all available groups will appear below. Tap Add to finish.
XM-2DTSBN6210 OPERATION Adding Favourites Using favourites you can quickly access locations and set as navigation destinations. From the first menu tap Find & Navigate and then select the Favourites tab Tap on a favourite and you will be taken to the following screen. To expand a group tap on it. This page operation details, please look at page 31 Favourties Editor From the Main menu tap Favourites Editor. You can move favourites between groups by dragging them around.
XM-2DTSBN6210 Odometer Odometer is a tool that lets you measure distances as you drive and further splits them between private and business mileages. From the main menu tap Odometer. Here you can see the total distance traveled for both private and business journeys. Select the check box next to the Private or Business items to toggle between the Private counter and Business counter. Note that you can only use one counter at a time, i.e. it is impossible to record a journey as both private and business.
XM-2DTSBN6210 OPERATION Delete all - deletes all waypoints in the list Reverse route - reverse the order of the route points, plan a route back from the destination to the departure Optimise - if you have selected more than one waypoint you Navigator will sort them to make your route faster To change the order of the waypoints simply drag them to new position using your finger. Tap a routing point to see another menu.
XM-2DTSBN6210 Show on map - show the manoeuvre in close up view on the map. Add to favourites - add the position to favourites. Close for routing - avoid this junction when calculating the route. If you close a manoeuvre from routing then you must recalculate the route by tapping Calculate Route in the Route. To permit a junction back again go to the Route menu and tap Disabled streets.
XM-2DTSBN6210 OPERATION Now tap the Record Journey button. Select where to save the journey file, e.g. Storage card or Object Store (Internal Memory) You are now asked to enter a name for the saved file. A name based on date and time is automatically suggested for you, but you can change it if you wish. Tap Ok. The GPS data is now being saved to file. To stop recording tap the Stop journey saving button.
XM-2DTSBN6210 Settings Tap the Settings Icon. There are several options here GPS, Navigation, Tracking, Camera warnings, Product Key and TMC. GPS You can now configure how your journey will be displayed on the map. Select Map Rotation Off to keep the map north up regardless of which direction you are driving in. Select Map Rotation On to keep the map in the direction of travel (i.e. you will always be driving towards the top of the screen).
XM-2DTSBN6210 OPERATION Navigation You are now in the Navigation Settings menu. Tap Autozoom to toggle the Autozoom feature on or off. Autozoom will automatically adjust the map zoom as your drive, zooming out when between manoeuvres and zooming in as you approach the next junction. Tap 3D View/Plane View to toggle between 3D and 2D maps as you drive. Tap Routing mode to select your preferred route type. Fastest - this is the default route mode. It takes your to your destination in the quickest time.
XM-2DTSBN6210 - Truck -In the standard version of navigator this only changes vehicle speed attributes. A more accurate truck mode is available in the Navigator Truck version where bridge heights, weight limits and vehicle lengths are taken into account. To define your own commercial vehicle click Add new. Now enter a name for your vehicle, the type and its dimensions and weight. If you want to restrict certain road types from navigation for this particular vehicle you can do so here.
XM-2DTSBN6210 OPERATION Toll Rd Allowed/Prohibited - if you prohibit toll roads, Navigator will work out journey avoiding tolls altogether. Please note that journeys may be considerably longer and occasionally impossible to complete Charge Rd Allowed/Prohibited - if you prohibit charge roads, Navigator will work out journey avoiding roads where charges (mainly taxes) apply. Charge roads differ from tollroads in that you are often required to buy a display a special license to use them.
XM-2DTSBN6210 Keyboard In Navigator there are several on screen keyboard modes - the standard QWERTY/QWERTZ layout that is on your PC keyboard, an alphabetical layout ABCDEF as well as several international layouts. This is purely a personal preference and you should select the layout that most suits you. Here is what the different layouts look like. Keyboard On/Off - If you have a device with a hardware keyboard (like the HTC Universal, O2 Exec etc.
XM-2DTSBN6210 OPERATION If a region is missing from the list please first install it as described here. Map colour schemes Change the map colours to a different scheme. Select POI Types Here you can select which Points of Interest are displayed on the map. Product key There may be times when you need to replace the Navigator product key. For example, if you want to upgrade from a time limited version or if you want to enable vehicle tracking on your PDA. Tap the Product key icon in Settings.
