Operation Manual
8
DISC / USB / MICRO SD CARD OPERATION
To insert DISC / USB / SD CARD
• To play files on a disc, insert a disc with the label surface facing upward into the disc slot.
Playback will begin automatically.
• To play files in a USB device or an SD card, open the USB port cover and insert the USB
storage device into the USB port or an micro SD card into the micro SD card slot.
Playback will begin automatically.
Label surface up
Eject Disc/USB/Micro SD
Play/Pause
Next/Previous Track
Fast Forward/Backward
Introduction Scan
INT
Repeating the same track
RPT
Playing all tracks in random
RDM
Track/Folder Navigation
5/-10
6/+10
5/-10
6/+10
• To eject a disc, press the button to stop playback. Press the (eject) button to eject the
disc and then remove it
• To eject a USB device, press the button to stop playback, then remove the USB device.
• To eject an Micro SD card, press the button to stop playback, then press the micro SD
card, to eject the SD card then remove the SD card from the micro SD card slot.
Press the (play/pause) button to pause or resume playback.
• To play the next track, press the button.
• To play the previous track, press the button.
• To fast forward, press and hold the button.
• To fast backward, press and hold the button.
Press the button to play the first 10 seconds of each track, press again to stop the
introduction scan, and play the current track.
Press the button to repeat the current track, press again to stop repeat plaback and
resume normal playback.
Press the button to play all tracks in random order, press again to cancel this function.
• During a disc, USB or micro SD card mode, press the button to go backward 10 tracks.
Press the button to jump forward 10 tracks.
• During a MP3 disc, USB or SD card mode, press and hold the button to go back the
previous folder. Press and hold the button to go to the next folder.
You can repeat this function depending on the number and level of folders.
• These buttons have no this function if the USB device or SD card has no folders.