Topic: EN Installation Manual XM-2CDB620 Thank you for purchasing one of our XOMAX products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We recommend you to let the technician install the unit in your vehicle.
EN Topic: Safety instructions and precautions 3 ISO plug configuration 13 Socket A (power supply)..................13 Handling by stop only....................... 3 Socket B (loud speakers).................13 Installation..................................... 3 Regular loudness............................. 3 Common solutions 14 Recycling of an old unit 16 Recycling of the battery 16 Repair of the unit............................ 3 Power supply..................................
Topic: Safety instructions and precautions EN Leave all the repair operations to professional technicians. Safety instructions and precautions ! Due to flawed warranty seal the warranty becomes invalid. ! Handling by stop only ! Power supply To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Use the unit connected only to 12 Volt on-board power supply.
EN Topic: ! Safety instructions and precautions electric shock do not put the unit in to the moist environment (e.g. adverse weather conditions, inappropriate wet cleaning etc.) Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish.
Topic: Installation EN with the ground (GND) (negative). Installation »» Please tag the polarity of the available speakers before you disconnect the vehicle battery. ! We recommend you to let a professional technician install the unit in your vehicle. ! »» A proper grounding of the unit's housing requires a clean ground connection. Thus the grounding area should be rust-, stain- and dust-free.
EN Topic: Installation »» The speakers should feature the impedance of 4-8 Ohm and a sufficient wattage. »» Please ensure that the speakers you are connecting with the unit are intact. Damaged speakers can impair the unit. »» To avoid a short circuit please isolate all cable junctions and endings of the unused cables with the electrical tape. »» All the cables should be layed and fixated tidy and properly. The cables should not contact any movable or hot objects.
Topic: Installation instructions EN Installation instructions i Please note, that this installation manual was generalized attending to provide you with the common indispensable information. Therefore it might cause from product to product some irrelevant discrepancies, especially regarding some depictions (e.g. installation accessories) You can find the detailed manual for your XOMAX product on our homepage: www.xomax.de/download 1 1 2 3 4 5 5.
EN Topic: Installation 2 dual-ended bolt then the dual-ended bolt of the unit should be pulled through one of the holes in the fixation metal sheet. 2 Fixture of the fixation sheet This step can not be accomplished in every vehicle, thus it may be possibly skipped. The fixation metal sheet should be fixated in the vehicle first, Later ( see page 9 ) the unit will be fixed to the metal sheet with the washer and the nut. 3 Please insert the installation frame in the installation cell (car radio slot).
Topic: Installation EN 4 click Now slide the unit carefully into the already fixated frame till it clicks into place. 4 Connect the unit Please connect the ISO cable first with the ISO plug of the unit, then with the one of the vehicle. Do not forget to connect the radio aerial. 5 fixation metal sheet fixation bolt fixation nut fixation metal sheet. Now the unit should be fixated to the metal sheet with the washer and the nut.
EN Topic: Deinstallation instructions Deinstallation instructions 1 to release the unit from the installation frame. 1 Prepair the instruments To deinstall the unit you will need a spanner (a wrench) to unloose the fixation nut and 2 extraction keys (optional) 2 unloose the fixation nut This step may be possibly skipped, if due to the lack of space the unit initially was not fixated to the fixation metal sheet.
Topic: Deinstallation instructions EN 3 extraction keys In each case the key should be inserted centered, the inserting point should be equally distanced both from the top and from the bottom. 3 Use the extraction keys Please insert the extraction keys into the dedicated recesses between the installation frame and the unit's housing. 4 unlocking holding side-cogs can be carefully pulled out.
EN Topic: Deinstallation instructions 5 Afterwards please disconnect all the cables incl. the ISO multicore. 5 Remove the unit Now pull the unit carefully out of the installation frame or out of the car radio slot in case the frame was already firmly fixed to the unit by delivery. 6 6 Remove the installation accessories Finally remove all the installation accessories such as fixation metal sheet and installation frame.
Topic: ISO plug configuration EN ISO plug configuration A 2 4 6 8 1 3 5 7 2 4 6 8 Socket A (power supply) 1 3 5 7 B Socket B (loud speakers) On the A side you can find the socket for power supply. On the B side you can find the speakers terminals.
EN Topic: Common solutions Common solutions The following advices are generally valid and refer to diverse Xomax models with the similar characteristics. Please note that some articles may refer not to your model exactly and contain the describtion of features and functions that your model does not support. The describtion of the problem The cause and the solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Topic: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. EN For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna: We recommend you to substitude the existing antenna by the larger and therefore more efficient one. Shark fin or rod antennas (under 5 cm) are definitely insufficient.
EN Topic: Recycling of an old unit Recycling of an old unit Recycling of the battery User information regarding recycling of electric and electronic devices (private households) According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
