Operation Manual

15
SMART-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Startup operations
Unit on/off
Press the PWR button to turn the unit
on.
If the unit is already on, keep the PWR
button pressed for a couple of seconds
to turn it down.
Insert a micro SD card
Insert a micro SD card into the slot with
the label side up and the pin side down.
Make sure that the card is intact and
dirt-free.
Insert a USB flash drive
Insert an USB ash drive proper into a
USB plug.
Do not insert any heavy or big USB
ash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB ash drive.
Micro SD cards and USB ash
drives should have following le-
system format: exFat or Fat32. Other
types will not be supported.
i