CAR NAVIGATION SYSTEM SMART-01EU User manual ENGLISH
User manual SMART-01EU Thank you for purchasing one of our SMART-01EU products! We appreciate your confidence. Enjoy your brand new multimedia unit! i Please read the following manual carefully before you install and use the unit. Please save this manual in case you will need to clarify further possible questions regarding installation and usage of our product. We are constantly trying to keep our online-library of user's manuals for our products up-to-date.
Thema: List of contents EN List of contents Safety instructions and precautions 4 Specifications 6 Package content 7 Installation 8 Installation notes............................. 8 Remote control 16 Menu setup 17 Common solutions 27 Recycling of an old unit 29 Recycling of the battery 29 Before the installation...................... 8 Connection schedule – ISO plug 10 ISO-cable connection schedule 11 ISO plug configuration 12 Socket A (power supply)..................
Thema: Safety instructions and precautions Leave all the repair operations to professional technicians. Safety instructions and precautions Due to flawed warranty seal the warranty becomes invalid. ! Handling by stop only ! Power supply To avoid any accidents please don't handle the unit while you driving. Please stop and park the vehicle at safety place and handle the unit casually. ! Use the unit connected only to 12 Volt on-board power supply.
Thema: ! Safety instructions and precautions EN Cleaning of the unit Please keep the unit clean and remove the dust from it regularly. Please use for that a soft and dry cleaning rag. ! Major soilings can be removed carefully with the wet cleaning rag. Do not use any chemical or alcohol-containing detergents to avoid the damage of the unit's varnish. ! »» Soilings, scratches, dust can impair the playback and damage optical lenses. »» Do not label CDs/DVDs with an inappropriate stickers and markers.
Thema: Specifications EN Specifications Common data USB-port Operating voltage . ........................... 12V DC Plug type ................................... Typ A, USB Fuse .................................................... 15 A Max. supported volume . .................... 128 GB Instalation size ............ 2DIN - SMART specific File system ............................... exFat , Fat32 Audio SD-card slot Output power ............................. 4 x 60 Watt Slot typ . ......
Thema: Package content EN Package content i Please note: the package content may vary due to technical updates. Please check the accessories on completeness. B C A D E G F A car radio E ISO cable B remote control with battery F USB extension cable C Navigation software (MicroSD card) G installation manual D GPS aerial The images serve as example. Optically the may vary from the original.
Thema: Installation EN read the manual of your vehicle. Installation »» Make sure that your vehicle is equipped with a car radio slot of required size (2DIN) Installation notes Here you can find relevant installation notes and common information. »» As may be the case you will need a suitable faceplate, adapter or other accessories. These could be provided from your local specialist supplier. i The detailed installation manual you can find on our homepage www. xomax.de.
Thema: Installation EN but the different color. For this reason while connecting this unit with the other devices please ensure that both of the cables in each case have the same purpose. To connect everything correctly please refer to the manuals of the both devices. »» To avoid a rogue and hazardous short circuit do not lay the yellow cable through the engine bay in order to connect it with the vehicle battery. »» Do not ever connect speaker cables among one another.
Thema: Connection schedule – ISO plug EN Connection schedule – ISO plug CAR NAVIGATION SYSTEM 10 SMART-01EU
Thema: ISO-cable connection schedule EN ISO-cable connection schedule CAR NAVIGATION SYSTEM 11 SMART-01EU
Thema: ISO plug configuration EN ISO plug configuration A 2 4 6 8 1 3 5 7 2 4 6 8 Socket A (power supply) 1 3 5 7 B Socket B (loud speakers) On the A side you can find the socket for power supply. On the B side you can find the speakers terminals.
Thema: Connection schedule – Cinch multicore EN Connection schedule – Cinch multicore CAR NAVIGATION SYSTEM 13 SMART-01EU
Thema: Startup operations EN Replacement instructions: Startup operations Usage of the remote control Before the first usage please remove the isolation plate. 1. Remove the battery compartment: push it to the left first, then pull it out. Aim the remote control at the IR receiver on the front operating panel. The IR receiver should not be blocked. 2. Remove the old battery and insert the new one (CR-2025 Lithium). As soon as the remote control does not work proper the battery should be replaced.
Thema: Startup operations EN Unit on/off Press the PWR button to turn the unit on. If the unit is already on, keep the PWR button pressed for a couple of seconds to turn it down. Insert a micro SD card Insert a micro SD card into the slot with the label side up and the pin side down. Make sure that the card is intact and dirt-free. Insert a USB flash drive Insert an USB flash drive proper into a USB plug.
Thema: Remote control EN Remote control CAR NAVIGATION SYSTEM 16 SMART-01EU
Thema: Menu setup EN Menu setup CAR NAVIGATION SYSTEM 17 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 18 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 19 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 20 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 21 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 22 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 23 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 24 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 25 SMART-01EU
Thema: Menu setup CAR NAVIGATION SYSTEM EN 26 SMART-01EU
Thema: Common solutions EN Common solutions The following advices are generally valid and refer to diverse car radios models with the similar characteristics. Please note that some articles may refer not to your model exactly and contain the describtion of features and functions that your model does not support. The describtion of the problem The cause and the solution The remote control is without function. Solution 1: Please ensure that the battery film is removed.
Thema: Common solutions Poor radio reception: The radio tuner finds no broadcaster or the reception is poor. EN For problem-solving regarding the radio reception it is important to know the type of the antenna of your vehicle. Here are the possible solutions for each type of the antenna: Type 1 – passive antenna: We recommend you to substitude the existing antenna by the larger and therefore more efficient one. Shark fin or rod antennas (under 5 cm) are definitely insufficient.
Thema: Recycling of an old unit EN Recycling of an old unit Recycling of the battery User information regarding recycling of electric and electronic devices (private households) According to the battery decree we make you aware of your obligation to dispose of empty batteries at municipal collection points. Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are labelled with the symbol pictured above.
