Smart Home Doorbell Kit PK2 User Manual Read before installing or using this product. Keep this guide for future reference. Visit Con�xo.
Welcome Thank you for purchasing Xodo Smart home products! We are commi�ed to bringing you excellence with smart technology products that make life more comfortable, convenient, and provide a more dynamic healthy lifestyle.
What’s included in the box You will find the following contents included to help you get started: Package Contents VD1 Smart Doorbell×1: External Ringer×1, Moun�ng Screw Sets×3, Screwdriver×1 E4 Smart Home Camera×2: Micros USB Wall Charger×2, Micro USB Cable×2, Moun�ng Screw Sets×6 2
Smart Doorbell Security Camera VD1 Specifica�ons Product Name: Xodo Wireless Doorbell Model: VD1 Rated Voltage: 100V-240V AC 50Hz-60Hz Material: PC Support System: Android or IOS Resolu�on: 1920 x 1080 Recording Angle: 166 degrees IR LED: 6 x 850mm WiFi: IEEE 802.11 b/g/n 2.
Smart Doorbell Introduc�on Light sensor Video Camera Lens Infra-Red LED Reset bu�on PIR Mo�on Dectector Moun�ng Slot Micro USB Port Microphone Ba�ery Compartment SD Card Port Main Bu�on Horn Smart Doorbell Components IR LED — The infrared light measures ambient light and will increase video play back brightness. Light Sensor — Determines when to turn on IR LED. MIC — Captures audio volume. Bu�on — Press to ring doorbell. PIR — Mo�on sensor will send alerts to smartphone. Lens — Captures video image.
Smart Camera Introduc�on SD Card Port Light sensor Reset Bu�on Lens IR LED Micro USB Port MIC Smart Camera Components IR LED —The infrared light measures ambient light and will increase video playback brightness. Light Sensor — Determines when to turn on IR LED. MIC — Captures audio volume.
Installa�on of Smart Doorbell 1. Remove the moun�ng bracket. (Remove oblique upper) 2. Mount the bracket to the wall. 3. Install the doorbell onto the moun�ng bracket. 4. Install the moun�ng screws under the bracket.
Download and Install the Xodo Smart APP Download and install the APP. It can be also be found by searching "Xodo Smart" by Con�xo Inc. in the App Store (for IOS) or Google Play Store (for Android). Xodo Smart Open the APP The welcome screen will appear and then you will be asked to login or register a profile. Register an account by entering your email address and se�ng up a profile or logging in with an exis�ng account.
Adding Devices You will be able to manually add a device. Select Doorbell to con�nue. Detec�ng Device When detec�ng devices manually, power on the device and confirm the indicator light is blinking rapidly. Once you confirm the smart device is ready, press the “next step” bu�on. Con�nue on to the next step. Pressing the Help bu�on will offer some troubleshoo�ng guidelines to follow.
Connect to a WiFi network The next step to connect the smart device is to connect to a WiFi network. If the proper network is not listed on this page, select the “Change Network” link to see a list of available networks. Enter the password next to the lock icon. Press “Confirm” to con�nue.
Scan with Camera Screens The pairing process will ask for your to use the doorbell to scan a QR barcode on the screen. Press “Con�nue” to begin. The QR barcode will appear on the screen. Hold doorbell camera in front of the QR barcode un�l you hear a beep. Press the “Heard the beep” bu�on to con�nue. Pressing the “Heard nothing at all” will provide some trouble shoo�ng steps to help get doorbell to scan the QR barcode.
Connec�ng A�er you hear the beep and con�nue on, the “Connec�ng” screen will appear. It will usually register within by approximately 30% range. The Device found will checkmark green, then Ini�alizing device will complete. A�er connec�ng process completes it will con�nue on toward the next screen. Confirma�on Screen The smart device is added once they are communica�ng on the same network. You can rename the smart device by clicking on the pencil icon. You can specify the loca�on.
Home Screen Updated Now that your device has been added, it will show on the home screen along with all other paired Xodo Smart Products. Now you are all set. Doorbell Home Screen The home screen will show the live camera feed along with doorbell controls. 1. Press the “Speak” bu�on to communicate with people next to the smart doorbell. 2. Press the “Record” bu�on to record video. 3. Press the “Take a Photo” bu�on to take a snapshot. 4. “Playback” will access stored video from the memory card.
Configure The Doorbell Se�ngs Different features can be adjusted from the menu bu�on on the upper right hand bu�on “ ” on the APP. 1. Device Name can be changed as desired. 2. Add Members to be able to control the device in the Share Device se�ng. 3. Device Informa�on provide network configura�on informa�on. 4. Use Echo provide the informa�on about how to connect your device to Amazon Alexa. 5. Power management se�ng show ba�ery level along with alert se�ng.
External Ringer Pairing An external ringer has been provided and can be setup to hear the doorbell ring. This is useful in the event if no smartphone that has been configured is available, others can s�ll hear the doorbell sound when guests arrive at the door. Configure the external ringer by long pressing the volume bu�on for 3 seconds. Then press the bu�on of the doorbell to complete the pairing. For mul�ple connec�ons, please note only one (1) external ringer can be connected to a smart doorbell.
Installa�on of Smart WiFi Camera 1. Rotate the base counterclockwise and take it out. 2. Take the base out and put it where you want to install it. 3. Install the base. 4. Mount the camera on the base and turn it clockwise.
Connect E4 The welcome screen will appear and then you will be asked to login or register a profile. Register an account by entering your email address and se�ng up a profile or logging in with an exis�ng account. Adding Devices You will be able to manually add a device. Select IP Camera to con�nue.
Detec�ng Device When detec�ng devices manually, power on the device and confirm you hear the “Didi” sound. Once you confirm the smart device is ready, press the “nest step” bu�on. Con�nue on to the next step. Pressing the “Help” bu�on will offer some troubleshoo�ng guidelines to follow. Connect to a WiFi Network Next step to connect the smart device is to connect to a WiFi network. If the proper network is not listed on this page, select the “Change Network” link to see a list of available networks.
Scan with Camera Screens The pairing process will ask for your to use the doorbell to scan a QR barcode on the screen. Press “Con�nue” to begin. The QR barcode will appear on the screen. Hold doorbell camera in front of the QR barcode un�l you hear a beep. Press the “Heard the beep” bu�on to con�nue. Pressing the “Heard nothing at all” will provide some trouble shoo�ng steps to help get doorbell to scan the QR barcode.
Connec�ng A�er you hear the beep and con�nue on, the “Connec�ng” screen will appear. It will usually register within by approximately 30% range. The Device found will checkmark green, then Ini�alizing device will complete. A�er connec�ng process completes it will con�nue on toward the next screen. Confirma�on Screen The smart device is added once they are communica�ng on the same network. You can rename the smart device by clicking on the pencil icon. You can specify the loca�on.
Home Screen Updated Now that your device has been added, it will show on the home screen along with all other paired Xodo Smart Products. Now you are all set. Camera Home Screen The home screen will show the live camera feed along with camera controls. 1. Press the “Screenshot” bu�on to take a snapshot. 2. Press the “Speak” bu�on to communicate with people next to the smart doorbell. 3. Press the “Record” bu�on to record video. 4. “Playback” will access stored video from the memory card. 5.
Configure The Camera Se�ngs Different features can be adjusted from the menu bu�on on the upper right hand bu�on “ ” on the APP. 1. Device Name can be changed as desired. 2. Add Members to be able to control the device in the Share Device se�ng. 3. Device Informa�on provide network configura�on informa�on. 4. Use Echo provide the informa�on about how to connect your device to Amazon Alexa. 5. Basic func�on se�ngs can set below func�ons: Flip Screen: on/off; Talk Mode: One-Way Talk/ Two-Way Talk. 6.
My Home Page Device Controls 1. Some devices can set group control. Click " " in the upper right corner 2. Click "Create Group". 3. The page displays all devices with the same model number and available to be added as a group. Select the device and click “Confirm”.
4.Enter group name and click “Save” to finish. 5.When a group has been created successfully, the page will be automa�cally redirected to the group control panel, where grouped devices can be managed. Smart Features 1 Click “Automa�on” on the "Smart" page. 2 Click “Add Automa�on“ or "+" to go to the smart configura�on page. 3 Click “Add condi�ons” or "+" to select trigger condi�on.
4 Click “Add ac�ons” or "+" to select the ac�on to occur. 5 Click “Valid Time Period” to set a valid �me period for automa�on. 6 Click “Next” to go to the smart configura�on page. 7, Enter the automa�on name click “Confirm” to finish. 8.Click the switch in the lower le� corner to select to execute or turn off the automa�on.
Smart Features - Scene To configure a scene with "Trigger automa�on", you must set up an automated scene in advance. 1 Click “Scene” on the "Smart" page. 2 Click “Add Scenario“ or "+" to go to the smart se�ngs page. 3 Click “Add ac�on“ or "+" to add set automa�on or equipment. 4 Click “Save”. 5 Enter the automa�on name click “Confirm” to finish.
Link Xodo Smart account to Google Home Screen 1. Open Google Play Store or Apple Store and download Google Home 2. Open the Google Home app. Click on Get Started. 3. Login with a Google Account or create a new account. 4. Use Loca�on access to find devices on the same wifi network. 5. You will need to permission so Google Home can access device. 6. The app will search for devices to connect.
7. If no devices can be found that are already setup, select NO. 8. A youtube video is available to help instruct how to use smart devices. 9. The app will show se�ngs to add devices, setup rou�nes, and adjust se�ngs. 10. If the devices are already installed and setup through the Xodo app, you can select the "Works with Google" setup op�on to con�nue. 11. Configure the home se�ngs by adding address and name to a "Home" group.
Control your smart devices through Google Home Now you can control your smart devices through Google Home. Take bedroom light as the example, the supported voice commands are as below: 1. Ok Google, turn on/off bedroom light. 2. Ok Google, set bedroom light to 50 percent. 3. Ok Google, brighten bedroom light. 4. Ok Google, dim bedroom light. 5. Ok Google, set bedroom light to red. Link Xodo Smart account to Alexa 1. Download the free Alexa app from the Amazon Appstore, Google Play, or the Apple App Store.
7. Open the smart life app to add 8. Click Se�ngs 9. Manage Smart Home Devices to verify Smart Life has been added. 10. You will be redirected to the account link page. Type in your Xodo Smart account and password, don't forget to select the country/region where your account belongs to. Then tap "Link Now" to link your Xodo Smart account. The country/region, the account, and the password must match.
