Smart Light Bulb LB3 User Manual Read before installing or using this product. Keep this guide for future reference. Visit Con�xo.
Download and Install the Xodo Smart APP Download and install the APP. It can be also be found by searching "XODO Smart" by Con�xo Inc. in the App Store (for IOS) or Google Play Store (for Android). Xodo Smart Open the APP The welcome screen will appear and then you will be asked to login or register a profile. 1. Register an account by entering your email address and se�ng up a profile or logging in with an exis�ng account. 2. Configure your WiFi by choosing your network and provide password creden�als.
Adding Devices When detec�ng devices manually, power on the device and confirm the indicator light is blinking rapidly. (Hold the reset bu�on for 5 seconds) Once you confirm the smart device is ready, press the “Confirm indicator rapidly blink” bu�on. Con�nue on to the next step. Pressing the “Help” bu�on will offer some troubleshoo�ng guidelines to follow.
Detec�ng Device When detec�ng devices manually, power on the device and confirm the indicator light is blinking rapidly. • Once you confirm the smart device is ready, press the “Confirm indicator rapidly blink” bu�on. Con�nue on to the next step. • Pressing the help bu�on will offer some troubleshoo�ng guidelines to follow • If the light bulb is not flashing, try turning the light bulb on and off three �mes then leave on.
Connect to a WiFi network The next step to connect the smart device is to connect to a WiFi network. • If the proper network is not listed on this page, select the “Change Network” link to see a list of available networks. • Enter the password next to the lock icon • Press Confirm to con�nue Connec�ng The Connec�ng screen will appear, it will usually register within by approximately 30% range. The Device found will checkmark green, then Ini�alizing device will complete.
Confirma�on Screen The smart device is added once they are communica�ng on the same network. • You can rename the smart device by clicking on the pencil icon. • You can specify the loca�on. • Press the Completed bu�on at the bo�om of screen to con�nue to next step. Home Screen Updated Now that your device has been added, it will show on the home screen along with all other paired Xodo Smart Products. Now you are all set.
White Mode The White Mode screen will allow basic controls over the standard ligh�ng mode.
Scene Mode Scene Mode allows addi�onal controls for preset ligh�ng • Each light mode will provide different ligh�ng effects to choose from. Schedule Add schedules to give an automated response from the smart light.
Le� Time This will keep the bulb in ON posi�on for a specific dura�on of �me. 1. Click "Le� �me". 2. Select the switch that needs to be set. 3. First configure the hours (le�). 4. Next configure minutes (right). 5. Click "OK" to save the se�ngs.
Different features can be adjusted from the menu bu�on on the upper right hand bu�on “ ” on the APP. 1. Device Name can be changed as desired. 2. Device Loca�on can set the loca�on of the power strip in your home. 3. Check Device Network allows to check the network connec�on status. 4. Add Members to be able to control the device in the Share Device se�ng. 5. Create Group to control other smart device at the same �me. 6. Device Informa�on provide network configura�on informa�on. 7.
4. Use Loca�on access to find devices on the same wifi network. 5. You will need to permission so Google Home can access device. 6. The app will search for devices to connect. 7. If no devices can be found that are already setup, select NO. 8. A youtube video is available to help instruct how to use smart devices. 9. The app will show se�ngs to add devices, setup rou�nes, and adjust se�ngs.
10. If the devices are already installed and setup through the Xodo app, you can select the "Works with Google" setup op�on to con�nue. 11. Configure the home se�ngs by adding address and name to a "Home" group. Control your smart devices through Google Home Now you can control your smart devices through Google Home. Take bedroom light as the example, the supported voice commands are as below: 1. Ok Google, turn on/off bedroom light. 2. Ok Google, set bedroom light to 50 percent. 3.
Link Xodo Smart account to Alexa 1. Download the free Alexa app from the Amazon Appstore, Google Play, or the Apple App Store. 2. Open Alexa app to home screen 3. In upper le� hand corner open the menu. 4. Next click on "Skills & Games" 5. In top of app you can now search for "Smart Life" 6. Smart Life App will appear.
7. Open the smart life app to add 8. Click Se�ngs 9. Manage Smart Home Devices to verify Smart Life has been added. 10. You will be redirected to the account link page. Type in your Xodo Smart account and password, don't forget to select the country/region where your account belongs to. Then tap "Link Now" to link your Xodo Smart account. The country/region, the account, and the password must match.
