Spec Sheet

XO is exclusively distributed by
EASTERN MARKETING CORP.
24 Eisenhower Parkway
Roseland, NJ 07068
XOB_WC
WALL MOUNT HOOD
HOW DOES CODE COMPLIANCE CONTROL HELP -
CODE COMPLIANCE CONTROL (CCC) enables the installer to re-program the hood as it
is being installed. Your XO Hood is set to operate at 600 CFM maximum at the factory.
Re-programing is accomplished quickly and requires no special tools or additional parts but
once done, the hood air flow rate is limited to a maximum of 395 CFM below the 400 CFM
cap that most local codes impose eliminating the need for additional controls.
Re-programming also disables the Power Boost function. After conversion, the installer
axes a label stating the unit has been converted to 395 CFM max. Once done, the unit
cannot be changed back.
If your application calls for a make-up air solution, XO gives you more choices.
RECOMMENDED MOUNTING HEIGHT
All range hoods have a recommended range of
installation height over the cooking surface. However
cooking styles, types of cooking equipment and
installation limitation can vary greatly. For installations
outside the recommended range - consult XO.
RECIRCULATION
These XOB models may be installed
with an optional recirculation kit
when venting outside is not practical.
When used in recirculation mode the
filtered exhaust is directed back into
the living space through vents in the
telescoping duct cover. These vents
cannot be covered in the installation.
THESE MODELS HAVE A 6” DIAMETER VERTICAL EXHAUST DUCT