Operations Manual

EXI HALO Installation & Operation Manual 981-000003-000
EXI Wireless Systems 38 March 2000
Revision 2.0
Figure 28 - Buttons for Dealer and Supervisor modes
Both Dealer and Supervisor modes require a User Name and Password for access. Upon entering the correct
information in the panel as shown below, the HALO Console enters the appropriate mode.
Figure 29 - Dealer Mode User/Password Prompt
The User mode only has access to the Floor Plan screen, while the Supervisor mode has access to system Activity,
Tag management and Users management screens. The Dealer mode has an additional Dealer Only screen that is
used to add floor plans and network devices, in addition to being able to set system parameters and carry out simple
diagnostics.
USER SUPERVISOR DEALER
Figure 30 – Available Screens Depending on Access Level
Level Password Functions Access Management
User Yes Admit Patients
Discharge Patients
Accept/Silence alarms
Toggle between floor plans (No
Password required)
Access controlled by
Supervisor or Dealer level
users
Supervisor Yes All user functions
Manage user list
Assign usernames and passwords
View and annotate activity logs
Add/Delete/Edit tags from fleet
Initiate System Data Backups
Print logs
Exit the Halo system
The first Supervisor is
setup by the installing
dealer. This Supervisor
may add more assigned
supervisory access.
Dealer Yes All user/Supervisor functions
System Diagnostics
System modifications
Importing floor plans
Controlled by Dealer and
EXI