Operations Manual

EXI HALO Installation & Operation Manual 981-000003-000
EXI Wireless Systems 36 March 2000
Revision 2.0
are reread. If there are any non-bypassed Tags detected, Full-Alarm will start and the HOST computer will
report a Tag Alarm.
7.6.2. Full-Alarm
Full-Alarm is indicated locally by a steady Alarm light on the Keypad and the Full-Alarm siren. This
alarm will continue until all the Tags leave the detection field or the user requests a Bypass.
7.6.3. Elevator Bypass
Bypass is initiated locally with the Keypad. The Bypass will only apply to the Tags that are currently in the
field. Any new Tags detected after the Bypass request will cause the Pre-Alarm to start again. If there are
no Tags in the field at the time of bypass, there will be nothing to Bypass. If any Tags are bypassed, the
Bypass light on the Keypad will be on and will remain on until all the bypassed Tags have left the elevator.