User's Guide

EXI ECO-Lite User Manual 980-000004-000
EXI Wireless Systems 9 May 2000
Revision 1.0
7. Wireless Keypad
The Wireless Keypad has 2 lights to indicate its status:
LITHIUM BATTERY
8 POSITION ROTARY SWITCH
BYPASS (Green)
BATTERY LOW (Red)
Back View Front View
•
BYPASS
(Green) Light will flash when the bypass code is entered.
•
BATTERY LOW
(Red) Light will flash once every 6 seconds when the battery is low on the key-
pad. Battery has an operating life of 5 years with an average of 100 keypad entries per day.
The Wireless Keypad can be mounted inside or outside the detection field of the controller. When it is
mounted inside the detection field, the alarm will sound as a patient is brought into the detection field. The
alarm is silenced once the bypass code is entered into the keypad.
If the keypad is mounted outside the detection field no alarm will sound when the bypass is activated.
8. Bypassing / Escorting Patients
• Bring the patient to the Wireless Keypad mounted 8’12’ away from the protected doorway
(Alarm will sound if keypad is in the detection zone)
• Enter in the Bypass Code on the Wireless Keypad (alarm will be silenced if keypad is in the detec-
tion zone).
• You have 10 seconds to bring the patient into the detection field or the system will rearm itself.
• Once the patient is in the detection field you have 90 seconds to escort the patient out of the door
way or the system will go into alarm state.
• After the patient has been successfully bypassed the system will rearm itself within 8 seconds.
9. Accepting Alarms
• Attend to alarm location according to the Controller.
• Remove patient (transponder) away from the doorway
•
Enter in the Bypass Code to accept the alarm