Owner's Manual

88
Using the Vehicle Dock From the Universal Xpress Car Kit
If you have chosen to use the Vehicle Dock from the Universal Xpress Car Kit rather
than the PowerConnect Vehicle Dock included with your OnyX Radio, you will need
to complete some additional installation steps. When you have completed these
additional steps, you can continue with the installation of your OnyX.
When you are using the Universal Xpress Vehicle Dock, the screen will initially
display “AUX Connected” when you power on your OnyX. Ignore this message.
Once you have completed the steps below, it will not be displayed again.
If you are connecting the audio through your vehicle’s FM radio (SureConnect
or FMDA):
1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 83, and
disable AUX Detect.
2 Turn the FM Transmitter in OnyX On. Refer to “Turn FM Transmitter On/
Off” on page 89, and turn the FM Transmitter On.
3 Continue with the installation.
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 83, and
disable AUX Detect.
TIP! The FM Transmitter must be Off. To verify that the FM Transmitter is Off,
refer to “Turn FM Transmitter On/Off” on page 89.
2 Continue with the installation.
Configuring Your OnyX